Total 265 engineering job vacancies in newcastle west

Apollo Fabrication are currently looking to recruit an experienced and qualified Civil Engineering Draftsperson to join their team in Young NSW.

Core objectives include:

- Drafting Small areas (Model and drawings)
- Ensure accurate and timely delivery of Shop drawings according to Company’s or Client’s standards.
- Performs Modelling with respect to Structural drawing & Architectural drawings.
- Prepares the 3D model in Tekla as per IFC drawings and Client’s requirements.
- Generates the GA drawings, Shop drawings, Erection drawings with related reports.
- Checks the Input drawings with latest revision before starting the model.
- Prepares the RFI's and update in the model as per RFIs reply by Client.
- Determines the Transportation and Erection issues after completing the model.
- Prepares Bill of Material, Title block, Template and Reports as per Client’s requirement.
- Assisting Drafting manager and Project Managers
- Document Control
- Received and send design drawings and update files on Project Folder and issue to draftee’s
- Shop drawings review and mark up queries
- Factory drafting - Update drawings, sections, dimensions, export and update NC Files and reports as required by factory staff
- Design Drafting Coordination (Emails/Correspondence)
- Attend Meetings and phone calls with clients and draftees.
- Drafting RFQs and lock in drafting company
- Send drawings to site teams.
- Issue shop drawings clients through electronic document management system e.g. Aconex & Procore (where applicable)
- Coordinate errors on drawings
- Review and respond to RFI from PGT/Draftee, update & Issue to builder
- Create new RFI's/Internal Responses check
- Update RFI register regularly and closed out RFI’s in electronic document management system e.g. Aconex & Procore (where applicable).
- Perform any other duties that may be assigned from time to time.

Skills and Abilities:

- Diploma of Civil Construction Design, Advanced Diploma of Civil Construction Design or relevant
- Bachelor of Civil Engineering or equivalent
- Ideally have a minimum of 5 years’ experience as a qualified Civil Engineer
- A strong knowledge of Civil Engineering
- The ability to work in a team environment.

Salary range is $70,000 - $85,000pa commensurate with experience.
Fulltime Position available

Applications open 12 February 2024 and close 12 March 2024.

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

The Company:
Our most valuable asset is our people. Nothing is more important than their safety and well-being. Our team, families and clients rely on this commitment. There can be no compromise.
Dwyer Engineering & Construction Pty Ltd is one of the largest steel fabricators and maintenance providers in the Southwest (Harvey, WA) and a major provider of services throughout Western Australia.
At Dwyer Engineering we pride ourselves on providing a safe and quality service to our clients, which includes shop detailing, fabrication, surface treatment, site installations and ongoing maintenance support.

The Position:
Dwyer Engineering (www.dwyereng.com.au) is looking for Boilermakers, First Class Welders and Pressure Welders for ongoing fulltime work in our Harvey workshop. FIFO 2n2 Roster also available.
Requirements:
• Relevant Trade Certificate or sufficient work experience in lieu of formal qualifications
• 5+ years' experience in a similar role
• GMAW, FCAW and GTAW experience
• Sound knowledge of welding procedures
• Welding to a high standard and finish in all positions
• Current driver’s license
• Good time keeping and job recording skills.
• Must be willing to work 8–12-hour days plus Saturdays when required.
• Strong commitment to health, safety, and the environment
• Focused on quality.
• Attention to detail.
• Live local to the Southwest of WA, or have accommodation available to yourself in the Southwest region.
• Proof of Right to work in Australia.
• Must have the ability to perform physically demanding duties and be reliable; and
• Must be able to work un-supervised.
• Ability to start ASAP.
Annual Base Salary of $70,595 - $144,248.
DYR is an equal opportunity employer, and we support diversity in our workplace.
To register your interest, please send your resume to:
[email protected] (please put position you wish to apply for in subject line)

We act as a recruiter for EMAG Apartments.

EMAG Apartments is a family-owner construction and development business delivering high quality rental accommodation to Sydney for over 60 years. We are committed to ensuring our projects provide tenants with excellent lifestyle and accommodation offering, with a key focus on size and location.

EMAG Apartments are seeking an experienced Electrical Engineering Technician to join the team.

The position will entail:
Design, installation, troubleshooting, support and maintenance of Electrical systems
Collecting data, performing tests and complex calculations, graphing results, and preparing charts and tabulations
Estimating quantities of materials required, and pricing the cost of those materials.
Preparing quotations inclusive of bill of materials.
Review, check and approve of all electrical works performed by the team.
Plant Room and Main Switch room equipment preventive and corrective maintenance.
Build, troubleshoot and repair Electrical panel boards, ATS, UPSs, CCTV, Air conditions, transformers, voltage regulators, Phase relays, Timers, contactors, MDB, JBX, temperature sensors,DC, AC.
Inspect electrical components, such as transformers and circuit breakers to avoid electrical problems. Install and maintain wiring, control, and lighting systems.
Interact across multi-skilled teams to ensure project scope and specifications are aligned to the overarching technical and operational design.
Communicate and coordinate day-to-day activities. Required Skills:
Must have strong communication skills
Must be able to work in a team environment
Well-organised and have attention to detail

The successful candidate should have a minimum of 2 years of relevant experience. Holding a relevant qualification is preferred but not essential.

This is a full-time and permanent role.

Salary: $60,000 $80,000 + super, depending on experience.

Retro Cotton are currently looking to recruit an experienced and qualified Mechanical Engineering Technician to join their team in Warren.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment

Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Position available

Applications open 11th December 2023 and close 11th January 2024

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Summary Are you ready to embark on a new journey in the world of mining? Cook Colliery is thrilled to offer exciting opportunities for an Read More...

Click here to view more detail / apply for Electrical Engineering Manager

Summary Are you ready to embark on a new journey in the world of mining? Cook Colliery is thrilled to offer exciting opportunities for an Read More...

Click here to view more detail / apply for Mechanical Engineering Manager

Please apply for role here: https://www.google.com/about/careers/applications/jobs/results/91893926329230022

Minimum qualifications:
Bachelor's degree in Computer Science or related technical field, or equivalent practical experience.
Experience working with one or more of the following: C, C++, Java, Go, or Python.

Preferred qualifications:
Experience in recruiting and managing a team of engineers on large scale projects.
Experience in problem-solving and analyzing global scale distributed systems.
Experience in algorithms, data structures, complexity analysis, and software design, or expertise in Unix/Linux systems, IP networking, performance, and application issues.
Knowledge of technical coding, networking, operating systems, and storage.
Excellent management and communication skills.

About the job
Site Reliability Engineering (SRE) combines software and systems engineering to build and run large-scale, massively distributed, fault-tolerant systems. SRE ensures that Google's services—both our internally critical and our externally-visible systems—have reliability, uptime appropriate to users' needs and a fast rate of improvement. Additionally SRE’s will keep an ever-watchful eye on our systems capacity and performance. Much of our software development focuses on optimizing existing systems, building infrastructure and eliminating work through automation.

On the SRE team, you’ll have the opportunity to manage the complex challenges of scale which are unique to Google, while using your expertise in coding, algorithms, complexity analysis and large-scale system design.

SRE's culture of diversity, intellectual curiosity, problem solving and openness is key to its success. Our organization brings together people with a wide variety of backgrounds, experiences and perspectives. We encourage them to collaborate, think big and take risks in a blame-free environment. We promote self-direction to work on meaningful projects, while we also strive to create an environment that provides the support and mentorship needed to learn and grow.

To learn more: check out our books on Site Reliability Engineering or read a career profile about why a Software Engineer chose to join SRE.

Google Cloud accelerates organizations’ ability to digitally transform their business with the best infrastructure, platform, industry solutions and expertise. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology – all on the cleanest cloud in the industry. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Responsibilities
Lead a team of Software/Systems Engineers on projects.
Manage availability and performance of mission critical services and build automation to prevent problem recurrence.
Lead and establish credibility with the quality of the teams' technical execution.
Manage on-call rotations across continents, using a follow-the-sun model.
Design, write, and deliver software to improve the availability, scalability, latency, and efficiency of the services.

ReSource currently seek a Mechanical Engineer.

Responsibilities include:

• Capable of hardfacing carbon and alloy steels (specifically for shredding applications)
• Operate and maintain laser cutters, CNC, lathe, etc machines
• Interpret technical drawings and instructions
• Plan and manage the daily workload and priorities
• Assist with the development and implementation of procedures and checklists
• Maintain a “hands-on” role with support of the team and any contractors during works

Experience:
The successful applicant must have a minimum 3 years’ experience with an industrial background and a strong focus on industrial plant and equipment.

The following attributes will be considered a strong advantage:
• Trade certified welder/machinist
• Experience working in recycling industries highly valued
• Self-motivated and possessing a good work ethic.
• Ability to work unsupervised
• Good time management skills
• Ability to demonstrate good communication skills
• Follows HSEQ standards and procedures
• Multitask and manage multiple priorities, possess strong problem-solving skills

My Australia Direct Pty Ltd is currently accepting applications for the position of “Mechanical Engineering technician” with Service 4 Buildings Pty Ltd (S4B Studio) in Sydney, NSW.

Services 4 Buildings Pty Limited (S4B Studio) delivers bespoke, sustainable solutions across a broad range of engineering disciplines, working closely with our clients from the outset of each project to its completion. Our collective experience spans decades and countries but our Australian operations are based in Sydney and Canberra.

Due to continued business growth, there is now a need to hire a Mechanical Engineering Technician to join our team at our Sydney, CBD office. This is a full-time position with annual earnings between $70,000 to $100,000 plus superannuation on offer depending on skills and experience.

Duties, Tasks & Responsibilities:
• Work closely with our mechanical engineering team on the design, development, testing and maintenance of various mechanical engineering projects
• Create detailed drawing and schematics
• Draft plans for machinery, mechanical systems or component
• Assist in the development and testing of protypes
• Prepare technical documentation, including assembly instructions, maintenance manuals, and engineering reports
• Conduct tests and experiments to evaluate the performance and reliability of mechanical systems or components.
• Assist in project management tasks such as scheduling, resource allocation, and tracking project progress.
• Help in estimating project costs by analysing materials, labour, and other resources required for mechanical engineering projects
• Provide support for the maintenance and troubleshooting of mechanical systems and equipment, both in the office and on-site
• Ensure that mechanical designs and systems comply with relevant industry standards, codes, and regulations.
• Prioritise safety in all aspects of work, adhering to safety protocols and ensuring that mechanical designs and systems meet safety standards.

Experience Required:
• Relevant qualification or equivalent work experience
• Minimum of 2 years’ experience as a mechanical engineering technician
• Remarkable abilities in analysis and problem-solving
• Excellent communication abilities and interpersonal skills
• Knowledgeable with mechanical engineering principles and practices
• Highly organised and detail oriented

Are you an experienced Engineering Technologist looking for a new opportunity in Sydney? Look no further! Due to an increase in our workload, we have seen increased growth and require two full-time (38 hours) Engineering Technologist’s to assist the construction team with the technical aspects of the project's by providing design engineering technology solutions. You will be responsible for analysing and modifying new and existing engineering technologies used in the design and construction of infrastructure and commercial projects to increase productivity and overall efficiency of our company.

Responsibilities/Job Duties
• Install and test new innovative technologies and prepare implementation plans and strategies.
• Design and develop new, more efficient mechanical systems and work on the implementation of engineering procedures.
• Perform professional mechanical software performance testing and identified and evaluated any failures and errors.
• Work on the constant improvement of company processes
• Introduce technologies & systems to increase efficiency and reduce expenses.
• Collaborate with colleagues on the automation of all engineering processes.
• Pro-actively participate in weekly team meetings with managers.
• Utilise standards, technical manuals, and directives to ensure compliance with codes and company policies.
• Compile data and perform dimensional and routine calculations required for the preparation of drawings.
• Read and interpret supplier/manufacturer manuals.
• Preparing specifications, civil engineering proposals and other documentation
• Writing inspection and testing plans
• Writing and submitting technical queries
• Analysing specifications and Data Sheets
• Assemble and install new or modified mechanical components for commercial equipment.
• Participating in planning to achieve prescribed objectives.
• Undertake engineering as required to include the following: concept, detail design, and analyses and /or calculations to enable the
preparation of documentation.
• Prepare civil reports for clients on matters relating to engineering services.
• Arrange for technologies to be tested and maintained to ensure compliance with project specifications.
• Use data from technical reports to organise routine maintenance of technologies.
• Ensure all engineering and work preparation activities are carried out with due regard to safe working practice, safety, personnel, and the
integrity of the plant.
• Identify for planning purposes the effects and impact on the schedule that any design, specification, or field change will cause.
• Work with the Project Engineering Team to produce any related studies or project method statements.
• Ensure correct implementation of QA/QC systems and procedures.
• Ensure contractor quality management compliance.
• Reading Project plans and sourcing technologies that will aid production.

Qualifications & Experience
• Relevant bachelor’s degree
• Minimum of 3 years’ experience
• A sound knowledge of the construction industry
• Australian Driver License

If you have the relevant experience & are looking for a challenging and rewarding career, we want to hear from you! Annual Salary will range from $65,000 – $85,000.
Apply now to join our team and work on landmark projects in Sydney.

OverviewEffectively resolve known traffic, parking and road safety issues in a timely and professional manner; successfully manage the access of oversize and over-mass heavy vehicles; and assist in the delivery Read More...

Click here to view more detail / apply for Engineering Traffic Officer

About Us

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Sulzer is a global leader in fluid engineering. We specialize in pumping, agitation, mixing, separation and purification technologies for fluids of all types. Our customers benefit from our commitment to innovation, performance and quality and from our responsive network of 180 world-class manufacturing facilities and service centres across the globe. Sulzer has been headquartered in Winterthur, Switzerland, since 1834.

Join our Services APAC team within the Services division in Australia as a Industrial Engineering Technologist to help us take our Maitland Service Centre to the next level. 

Your main tasks and responsibilities:

?    Manage all open engineering requests associated with abovementioned activity for complex repairs, upgrades, retrofit or reverse engineering
?    Conduct equipment inspection, root cause analysis, site visits to identify repairs, upgrades and retrofitting. 
?    Follow Technical specifications, provide comments/exceptions, input technical know-how as required to ensure equipment is technically fit for purpose
?    Report and document areas of technical risk and level of design review associated with Projects 
?    Challenge traditional Sulzer thinking to ensure we remain ahead of the competition without taking excessive risk
?    Liaise with other Sulzer Entities, specialist functions (e.g. Hydraulics, C&I) and key sub-contractors to clarify client requirements and ensure technical aspects have been adequately addressed
?    Assist the Engineering presence, when required, on customer visits, for technical assessment, bid clarification, client kick off meetings, etc



What you bring to Sulzer:

?    Trade Certificate III Fitter & Turner or similar.
?    Demonstrated experience in Mechanical fitting large equipment such pumps, fans, gear boxes and turbines.  
?    Forklift licence. 
?    A customer service focus with the ability to be adaptable.
?    Strong time management skills. 


What we offer you: 

?    Site allowances for field work. 
?    Employee Assistance Program.
?    On-site car parking. 
?    Competitive hourly rate. 
?    Work for a global organisation that values innovation, excellence and a commitment to the most important part of our business - our people and our customers. 


Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

Responsibilities include:
• Working on industrial installations, manufacturing lines and motor control faults
• Troubleshoot, modify, replace and commission electrical equipment
• Preventative/planned maintenance work
• PLC, robotics and automation controlled system fault finding and connections
• Knowledge of hazardous area work (training can be arranged for the right candidate)
Experience:
The successful applicant must have a minimum 3 years’ experience with an Industrial Electrical Background with a strong focus on industrial machinery and equipment maintenance. In addition:
• Background in maintenance and/or engineering project management
• Experience working in the e-waste, waste or metals recycling industries highly valued
• Follows HSEQ standards and procedures
• Scheduling and coordinating contractors
• Problem-solving equipment maintenance issues is preferred.
• Adaptable to changing business priorities and have initiative and motivation to complete tasks
• Multitask and manage multiple priorities, possess strong problem-solving skills
• Willingness to learn, teach and assist others

Responsibilities include:
• Lead the site maintenance requirements to conduct preventative and breakdown maintenance, oversee new equipment installations and upgrades as part of project activities
• Ensure that HSEQ practices are incorporated into all maintenance activities
• Plan and manage the daily workload and priorities of the required maintenance tanks
• Assist with the development and implementation of maintenance procedures and checklists
• Ensure critical and maintenance spare parts availability to reduce machine downtime
• Maintain a “hands-on” role with support of the site manager (and other staff members) and any contractors during maintenance or project works
• Complete reporting on unplanned maintenance activities, unplanned downtime and plant availability
• Manage actions for improvements or incidents in a timely manner

Experience:
• Experience working in the e-waste, waste or metals recycling industries highly valued
• Follows HSEQ standards and procedures
• Scheduling and coordinating contractors
• Problem-solving equipment maintenance issues is preferred.
• Adaptable to changing business priorities and have initiative and motivation to complete tasks
• Multitask and manage multiple priorities, possess strong problem-solving skills
• Willingness to learn, teach and assist others

Position Title: Engineering Project and Service Manager - Hydropower
Position No: SYD00001
Department: HYDRO
Reporting to (D&C)1: Managing Director
Reporting to (FLM)2: Director – Service and Rehab Australia
Location: Sydney NSW 2000
Location type: On-site/Office based with travel
Employment Type: Full-time Contract


ABOUT ANDRITZ

The ANDRITZ GROUP is a global market leader in the supply of plant, equipment, and services for hydropower stations, the pulp and paper industry, for solid/liquid separation in the municipal and industrial sectors, the steel industry, as well as for the production of animal feed and biomass pellets.

Headquartered in Graz, Austria there are approximately 28,000 employees world-wide.


JOB PURPOSE STATEMENT:

The objective of this new role is primarily to manage the supply and services of Electrical (E) and Mechanical (M) equipment package with the Andritz Hydro project team, JV partners, subcontractors and customers. This includes project, service and O&M business in both sales activities and proposal management as well as order execution.

- Conduct detailed contract review and coordinate progress meetings with all stakeholders
- Secure in full- and on-Time delivery of the components to the customer and achieve all associated milestones in the program
- Support the Service Hydro team in the bidding phase, sourcing, and installation activities
- Maintain close collaboration with the global project team (across multiple time zones)
- Deliver a best practice OHS&E attitude and performance


VALUES

Andritz employees are expected to consistently display the Andritz values of:

- Integrity (Ethics/ Transparency/ Compliance)
- Respect (Responsibility/ Fairness/ Respect/ Teamwork/ Performance
- Reliability (Respect/ Customer Orientation/ Quality)
- Sustainability (Environment/ Safety)


KEY RESULTS AREA

Project Execution 50%

Responsibilities:
- Coordinate our total supply and service package with the customer(s)
- Maintain close collaboration with all stakeholders regarding project progress and scope of supply
- In coordination with the project team, discuss and resolve contract related concerns with the customer(s)
- Monitor customer service, invoicing, expenditure, payments and administration costs
- Conduct regular review of contract requirements and communicate any variations
- Ensure timely and accurate completion of sales/service activity and customer reports (Weekly, Monthly or Annually as directed by Management)
- Coordinate activities in accordance with all local requirements and regulations, to ensure a smooth supply performance to the customer
- Manage specific Australian Standard (AS) requirements with the project team
- Identify and report any inconsistencies, hazards or risks (including proposed resolutions), to the project team
- Deliver and support excellence in OHS&E according to AS4801 and any other relevant standards
- Ensure accurate and thorough documentation of customer interactions and activities including the maintenance of accurate customer contact list and visit reports

Sales and Proposal Management 50%

Responsibilities:
- Develop competitive supply and service concepts in consultation with global experts within Andritz
- Develop competitive Operation & Maintenance concepts for maintaining power generation assets and synchronous condenser plants
- Elaborate appropriate technical solutions to satisfy customers’ needs
- Use product and technical knowledge to prepare estimates and tenders in accordance with sales and pricing policy
- Support the development of the local procurement concepts, a reliable local transport and logistics network and a local equipment installation program
- Negotiation with sub-suppliers and customers on behalf of Andritz Hydro
- Remain informed and up to date with regard to Industry related news, competition activities and product knowledge (Market Intelligence)
- Continuously and actively develop personal skills and knowledge relative to performance obligations
- Establish and develop the appropriate sales/service strategy for the sales of engineering services, supply contract for mechanical and electrical equipment in the Hydropower industry throughout Australia
- Identify new opportunities, promote new technologies, and/or replacement or modernisation of machinery and parts
- Respond to requests for sales opportunities through the development of proposals including bid formulation, reviews, approvals and submission, in consultation with key stakeholders
- Post proposal submission, assist with contract negotiations, reports on bid progress and ultimately, transition successful bids into implementation – all in consultation with relevant parties


KEY MEASURES:

Primary:
- Delivery (In Full and On Time) of agreed project outcomes
- Delivery on actions arising from meetings with the energy utility(s)
- Delivery on actions arising from meetings with the internal project team (off-shore)
- Delivery of actions on Service and Spare Parts and O&M Business
- Management and support of a proactive OHS&E delivery in accordance with contractual, regulatory and ethical standards
- Compliance to local company policies and guidelines

Secondary:

- Assist in the development and support of National sales opportunities for Andritz Hydro
- Develop and maintain key relationships with all stakeholders


OUR OFFER

Meaningful Work – ANDRITZ remains forefront of future engineering technologies and is committed to successfully delivering innovative, high-quality, environmentally responsible solutions to our customers, shaping the future we live in. Why are we so successful? Because we are passionate and love what we do!

Full Project Involvement – Working both locally and globally in a variety of key industries, our employees follow their design throughout the entire project lifecycle: from the initial concept, right into the field for commissioning. Employees and customers are both direct benefactors of this “total commitment” approach.

Professional and Personal Growth – As we continue to innovate and grow, so do our employees. From challenging and innovative work assignments to structured training programs, ANDRITZ provides employees with countless opportunities to grow their knowledge and be the best both professionally and personally.

Flexible Opportunities – ANDRITZ understands that life is a dynamic balance between personal and professional and believes that a successful and fulfilling career varies between people, so we offer a broad range of flexible opportunities.

Working Location - We offer a highly attractive office environment in the centre of the CBD in Sydney, close to the Sydney Harbour, coffee shops and various food courts.


CANDIDATE REQUIREMENTS & ATTRIBUTES

Education:
- Bachelor and/or Master’s degree in Mechanical or Electrical Engineering

Experience:
- At least 8 years demonstrable experience in senior technical roles in the in the Hydro sector, combined with successful project management/service management and execution experience.

Technical Competencies and Skillset:

- Project management/service experience with Hydro power projects or similar
- Extensive product, technical & field knowledge of the Hydro portfolio or similar
- Experience in Operation & Maintenance of power generation assets
- Experience in rotating equipment
- Experience with statutory licences, principal contractor role, and working permits
- Advanced knowledge of the MS Word, MS Excel, MS PowerPoint and MS Project
- Knowledge in an ERP system of advantage
- Ability to plan and manage your work effectively towards achieving objectives.
- Commercial & entrepreneurial awareness
- Good planning, communication & coordination skills
- Customer service orientated
- Takes ownership & initiative
- Fluency in German highly regarded

Note: This position description is not exhaustive. It represents the general position functions