Apollo Fabrication Group is currently looking for qualified and experienced Welders to join their team in Young NSW 2594.

The successful candidate will need to undertake and possess:

- Fabricate structural steel as directed
- Implement quality assurance procedures and requirements
- Inspect machines and equipment prior to use
- Run machines and equipment as directed
- Being able to read and analyse blueprints and drawings
- Have the ability to weld vertically, horizontally and overhead
- Be able to weld various metals using various techniques
- Cut, roll, shape, bend, mould, spin, heat or hammer metal products to fabricate parts or sub-assemblies
- Heat treat metal parts and components
- Set up and/or operate hand and machine tools, welding equipment
- Assemble parts and structures by lining up and joining them by welding, bolting or riveting
- Finish products by cleaning, polishing, filing or bathing them in acid solutions, or by applying protective or decorative coatings

Skills & Abilities:

- Certificate III in Engineering (Welding Fabrication) or equivalent qualification
- Minimum of three years’ experience in this role or similar
- Ability to work autonomously and as part of a team
- Good communication skills
- Understanding of safe work instructions

Salary range is $70,000 - $85,000pa commensurate with skills and experience

Full-time Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

Mick Muldoon Motorcycles are currently looking to recruit an experienced and qualified Motorcycle Mechanic to join their team in Bathurst NSW 2795.

The successful candidate will need to undertake and possess:

- Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, and generators
- Remove cylinder heads, grind valves, and scrape off carbon, and replace defective valves, pistons, cylinders and rings, using hand tools and power tools
- Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline and oil tanks, starters and mufflers
- Repair and adjust motorcycle subassemblies such as forks, transmissions, brakes, and drive chains, according to specifications
- Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools
- Reassemble and test subassembly units
- Disassemble subassembly units and examine condition, movement or alignment of parts visually or using gauges

Skills and Abilities:

- Certificate III in Motorcycle Mechanical Technology or equivalent
- Ideally have a minimum of 3 years’ experience as a Motorcycle Mechanic
- The ability to work in a team environment

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Bishop Transport are currently looking to recruit an experienced and qualified Diesel Mechanic to join their team in Forrestfield WA 6058.



The successful candidate will need to undertake and possess:

- Maintain, test and repair diesel engines, transmissions, brake systems and Hydraulic systems on vehicles and other heavy plant machinery/equipment
- Inspect brake systems, steering mechanisms, transmissions, engines, and other parts of vehicles, and other heavy plant machinery/equipment
- Do routine maintenance, such as changing oil, checking batteries, and lubricating equipment and parts on vehicles and other heavy plant machinery/equipment
- Undertake inspections, assessments and maintenance on Vehicles, and other heavy plant machinery/equipment


Skills & Abilities:

- Ideally have a minimum of 4 years’ experience as a qualified Diesel Mechanic
- A Cert III in Heavy Commercial Vehicle Mechanical Technology /Certificate III in Mobile Plant Technology or relevant
- Ability to work in a team environment


Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

For more than 5 years the friendly staff at Kaputar Ford have been selling and servicing new and used vehicles in Narrabri and the surrounding region. Their state-of-the-art modern showroom and large display areas allow customers to casually browse the great range of Ford Vehicles. We are currently looking to recruit experienced and qualified Light Vehicle Technicians to join their team in Narrabri NSW 2390.


The successful candidates will need to undertake and possess:

- Extensive experience in repairs and maintenance in line with the manufacturers’ requirements for all make and models
- The ability to perform scheduled maintenance servicing
- The capacity to service and repair vehicles as per the repair order with the allocated time
- Good verbal and written communications skills
- Strong diagnostics capabilities


Skills & Abilities:

- Certificate III in Light Vehicle Mechanical Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Light Vehicle Technician
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment


Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

On-Trac AG provide farming machinery, light construction equipment, spare parts and mechanical services across their three locations in Bathurst, Mudgee and Robin Hill. Currently they are recruiting for experienced and qualified Mechanical Engineering Technicians to join their service department in Bathurst NSW 2795.


The successful candidate will need to undertake and possess:

- Pre-delivery of new tractors
- Assembly of new attachments and hydraulic systems
- Servicing and maintenance of tractors and farm equipment
- Analyse and assess performance graphs to ensure functionality and diagnosis is in accordance with manufacturing specifications
- Dismantle defective tractors and components for repairs
- Reassemble tractors and farming machines and equipment following repair, testing operations and make adjustments
- Maintain maintenance records and adhere to work procedures and workplace policies
- Selecting correct tools and equipment for the assembling and installing of new and modified mechanical assemblies, components, machine, tools and controls and hydraulic power systems
- Ensuring works are within specifications and regulations including material costing’s, quantities, machine requirements and timeframe.

Skills and Abilities:

- Ideally have a Degree / Diploma in Mechanical Engineering or equivalent
- Minimum of 3 years or relevant experience preferably with farming machinery and equipment
- Professional, confident and positive approach to work
- OH&S awareness

Salary range is $70,000 - $85,000pa commensurate with experience

Full-time Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted applicants will be contacted

We are seeking a qualified and experienced ICT Business Analyst to join our dynamic team in Sydney. In this role, you will be responsible for analysing business processes, identifying inefficiencies, and delivering system and software solutions that enhance operational efficiency. This is an exciting opportunity for a professional with a passion for technology and problem-solving.



Key Responsibilities:

- Collaborate with users to formulate and document business requirements.
- Investigate and analyse business processes, procedures, and work practices.
- Identify inefficiencies and recommend optimal business practices and system functionalities.
- Use project management methodologies to develop project plans, allocate resources, and manage projects.
- Deploy functional solutions, including creating, adopting, and implementing system test plans to ensure quality and integrity.
- Develop user documentation and deliver formal training sessions for end users.
- Create functional and technical specifications for system developers.
-Utilize data and process modelling techniques to produce clear system design specifications.
- Act as a central reference point, providing guidance in system project decision-making processes.

Requirements:

Qualification: Bachelor’s degree or higher in a relevant field.

Experience: Minimum of 2 years of relevant work experience.

Skills:
- Strong ability to communicate and collaborate with users to identify business requirements.
- Proficiency in data and process modelling techniques.
- Expertise in developing functional specifications and deploying system solutions.
- Knowledge of project management methodologies and techniques.

Why Checkbox?

- Competitive salary – We believe in employee ownership and comfortable compensation for our employees so that they can be as happy and productive as possible without any reservations.

- Hybrid working arrangements – We offer a hybrid working arrangement where team members work in the Sydney CBD office on Tuesdays for weekly all-hands meetings and Fridays for end-of-week celebrations, while working remotely the other three days. The Sydney team is welcoming and friendly where they go together for coffee and lunch.

- Personal learning, development and work-at-home budget - Continuous development and growth is one of our core value, and we believe in developing our own home-grown leaders.

- Start-up hub in the heart of the city - Enjoy our city office which is decked full of snacks, drinks, premium coffee and coffee machine, and of course, a ping pong table and beers.

- Company wide social events - Enjoy company lunches, Friday night hangs, and wicked annual off sites (past events include a massive boat party, trip to a Hunter Valley mansion, and a week in Bali!)

- Transparent & open culture - Enjoy the benefits of an open culture where all questions and feedback are welcomed so we can be a better company day by day.




This position is open to Australian citizens, permanent residents, and qualified foreign applicants requiring visa sponsorship (TSS Visa).

We are an equal opportunity employer committed to diversity and inclusion.

Three Rivers Machinery are currently recruiting an experienced and qualified Supply, Distribution and Procurement Manager to join their team in Warren NSW 2824.

The successful candidate will need to undertake and possess but not
Limited to:

- Determining, implementing and monitoring purchasing, storage and distribution strategies, policies ad plans
- Preparing and implementing plans to maintain required stock levels at minimum cost
- Negotiating contracts with suppliers to meet quality, cost and delivery requirements
- Monitoring and reviewing storage and inventory, to meet supply requirements and control stock levels
- Liaising with other departments and customers concerning requirements for outward goods and associated delivery
- Overseeing the recording of purchase, storage and distribution transactions
- Demonstrates effective communication and problem-solving skills

The ideal candidates must have an eye for details; show pride in their work as well as having a ‘can do’ attitude.

Skills & Attributes

- Bachelor’s degree in supply chain management, Logistic, Business or related field required
- Minimum of three years of work experience in purchasing related field preferred.

Salary range is $80,000 - $90,000pa commensurate with experience.

Full time position available.


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

AUS-1 International Pty Ltd is an Automotive Electrical & Airconditioning company specialised in Heavy & Light Vehicles based in NSW. With years of experience and continuous technical development, they look after government and privatesector.AUS-1 International Pty Ltd is looking for experienced MECHANICAL TECHNICIANS to join their team of professionals on a full time and permanent basis.

To be considered for this role you must possess the following:
QUALIFICATION - Mechanical Technician trade qualification or equivalent
TECHNICAL - Strong mechanical knowledge on a wide variety of vehicle and equipment and deliver high standards of work that consistently meet or exceed customer, technical, and/or manufacturer specifications and standards
PROFESSIONAL - Demonstrate a professional, courteous, and respectful behaviour at all times
COMPANY REPRESENTATIVE - Contribute to achieving company goals and objectives
SKILLS – Strong communication skills, Strong diagnostic skills
TRAITS – Self-motivated, organised, punctual, reliable and have great work ethics
TEAM MEMBER - Participate as a proactive team member

Duties of the Role, your duties will not be limited to the following:
Perform repairs and maintenance in accordance with relevant technical specifications and standards
Read and interpret wiring diagrams and technical specifications accurately
Perform works safely and in an environmentally responsible manner
Diagnose mechanical faults accurately and in efficient manner
Conduct repairs and maintenance in accordance with manufacturer and technical specifications
Complete documentation accurately, including job cards, service sheets, parts records, timesheets, or other information as required
Fault find, and diagnose mechanical problems accurately and thoroughly
Use and maintain diagnostic equipment correctly and in accordance with manufacturer specifications

If you are looking for a change of environment in your area of expertise or would like to advance your current skills, and have met all the criteria above please apply now!
Salary: Between $70,000 and $75,000 per annum + Super

On behalf of our client, Caguioa Enterprise Pty Ltd is seeking applicants for an Agricultural Technicians, Dairy Farmers , Senior Dairy Cattle Farm Operator and Dairy Cattle Farm Operator position to join their team located in Regional Victoria.

Positions Available: Dairy Farm Positions

1. Dairy Farmers
Applicants must have at least a Bachelor’s Degree or 5 years of relevant experience.

2. Agricultural Technicians
Applicants must have at least a Diploma or 3 years of relevant experience.

3. Senior Dairy Farm Operator
Applicants must have at least a relevant AQF Certificate III (or equivalent) and
At least two (2) year of recent and relevant work experience or
At least five (3) years of recent and relevant work experience

4. Dairy Cattle Farm Operator
Applicants must have at least a relevant AQF certificate II or III (or equivalent) or
At least one (1) year full-time of recent and relevant work experience.

All applicants must meet the following criteria
• Patient, Hardworking, Resourceful, Trustworthy, Loyal, Efficient
• Understanding and passion for the Dairy industry
• Previous experience in a similar role.
• Constant monitoring of the Dairy Farm.
• Sound knowledge in Farming Techniques and Management.
• Demonstrate a broad and coherent body of knowledge of milk source and composition
• In-depth understanding of the safety and quality factors that determine the acceptability of dairy products by consumers.
• To be able to work and communicate effectively as part of a team.

Duties for Dairy Farmer:
• Supervision of Animal Husbandry and Feed Management.
• Managing all dairy cattle, heifers, dry cows, and calves
• Managing plant equipment and infrastructure maintenance
• Achieving agreed budgeted and physical performance targets
• Managing milk harvesting, milk quality and staff rosters
• Ensuring compliance with workplace and OH&S Legislation
• Adhering of Standard Operating Procedures (SOP)

Duties for Agricultural Technician:
• Manage the feeding program for springing cows.
• Inspecting and monitoring growth rates against targets.
• Nutrient Management Planning
• Arranging supply of vaccines, mineral supplements and another appropriate animal husbandry.
• Organise mating program for rising 2-year-olds
• Record all treatments to meet quality assurance requirements and farm policy.
• Select cows for Artificial Insemination, assist with semen selection. Mark inseminated cows and keep insemination records.
• Apply heat detection aids, identify, record, mark and draft cows on heat, segregate and prepare for insemination.

Duties for Senior Dairy Cattle Farm Operators:
• Plan all aspects of milk production processes including management and coordination of milking shed routines;
• Coordinate and implement reproductive programs, including artificial insemination and herd fertility management, detection of estrous and pregnancy;
• Assist in controlled breeding experiments to develop improved livestock strains;
• Implement calving procedures, including the ability to physically conduct unsupervised internal assessments to minimise the incidence of still births or injuries to cow or calf;
• Plan and manage pastures and crops for livestock production and develop livestock feeding plans.
• Analyse produce to set and maintain standards of quality;
• Supervise animal health programs, handle sick or injured animals and maintain an optimal environment for the
wellbeing of livestock consistent with the Australian Animal Welfare Standards and Guidelines – Cattle.

Duties for Dairy Cattle Farm Operators:
• Read and record instrument information i.e. Milk vat temperatures and cow numbers
• Undertake multiple functions, produce a quality outcome e.g. Farm machinery
• Operate milking plant and equipment.
• Operate standard measuring equipment
• Know general scientific terminology and assist with processes such as machine repair, artificial insemination, fertiliser mix design etc.
• Operate computerized system using menu options.

A remuneration package is between $65,835 to $90,000plus Superannuation will be negotiated depending on skills and experience.

Job Types: Full-time, Permanent

Cowra McDonald’s Restaurants (Maccas) are looking for great people! We are currently looking to recruit an experienced and qualified Restaurant Manager to join their team in Cowra NSW 2794

This role will suit a highly motivated, operations focused applicant who has completed LTS as a minimum has the skills to motivate a team and whilst being a professional employee but also having great fun along the way! Work directly with the licensee and get in control of your own future.

Duties and Responsibilities:

- Shift Management including training
- Set goals and action plans for the Restaurant within Shift Supervisor / Manager Responsibilities.
- Ensuring outstanding customer service and operations are a focus each day you work.
- Implementation and follow up of Food Safety procedures.
- Oversee and manage staff, with selected Department responsibilities
- Ability to achieve financial budgets.
- Maintain WH&S standards and cleanliness within the restaurant
- Ensure security is strictly always adhered to.

Skills & Experience:

- Ability to demonstrate McDonald’s KPI historical results / performance
- The ability to train and develop team members
- Proven staff management and leadership skills
- A hands-on approach
- Impeccable presentation and clear, concise communication
- A focus on policies and procedures
- A passion for delivering high standards of customer service
- Attention to detail

What we offer

- Above award salaries *great bonus scheme
- Relocation assistance available for the right candidates
- Multiple positions available
- Assured Future Career Growth
- You have total control over your career progression
- Continuous training
- National Accredited Certificate II, III and IV available
- Car/s Australian and Overseas Holidays / Corporate events all paid for.

Salary range is $65,000 - $75,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If this unique opportunity sound like one you would like to pursue, please click on Apply. Only shortlisted candidates will be contacted.

3PE Engineering are currently looking to recruit an experienced and qualified Welder to join their team in Yarraville VIC 3013.

The successful candidate will need to undertake and possess:

- Being able to read and analyse blueprints and drawings
- Have the ability and experience to use a TIG and MIG welder
- Examining welds for the width of bead, penetration and precision
- Have the ability to weld vertically, horizontally and overhead
- Be able to weld various metals using various techniques
- Cut, roll, shape, bend, mould, spin, heat or hammer metal products to fabricate parts or sub-assemblies
- Heat treat metal parts and components
- Set up and/or operate hand and machine tools, welding equipment
- Assemble parts and structures by lining up and joining them by welding, bolting or riveting
- Finish products by cleaning, polishing, filing or bathing them in acid solutions, or by applying protective or decorative coatings.

Skills & Abilities:

- Certificate III in Engineering (Welding Fabrication) or equivalent qualification
- Minimum of three years’ experience in this role or similar
- Ability to work in a team environment

Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Rhys Evans Farm Machinery are currently looking to recruit an experienced and qualified Mechanical Engineering Technician to join their team in Colac West VIC 3250.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors (change to match what company does)
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors (change to match what company does)
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Executive Manager Operational Risk & Compliance, Group Support Units

2 positions available

Do work that matters:
Risk Management (RM) is responsible for developing the risk frameworks to allow the Group to take conscious exposures to credit, market, operational, compliance and insurance risks within the approved appetite.
The Operational Risk & Compliance - Group Support Units team provides independent review and challenge of Operational Risk and Compliance activity within the Support Unit (SU) businesses (e.g. Financial Services, Group Corporate Affairs, Risk Management, Legal & Group Secretariat, Group Strategy and Human Resources).
See yourself in the team:
As Executive Manager, Operational Risk & Compliance, you will lead and guide Group SU businesses in embedding the Operational and Compliance Risk Management frameworks (ORMF and CRMF).  You will engage with senior stakeholders across the SU?s to provide meaningful and balanced insights to risk activity within their ... Click here to view more detail / apply for Executive Manager Operational Risk and Compliance

PHE Mining is currently seeking highly motivated Electricians to join our Bathurst team on a fixed-term basis. This is your opportunity to work with a safety-focused company while gaining experience in a mining environment.
PHEs Bathurst operations undertakes works at Cadia mine, just outside of Orange, NSW. The role involves industrial electrical and instrumentation installations, plant maintenance, shutdowns, and general improvement works in both a surface and underground environment.
If you are a qualified electrical tradesperson and have been wanting to get into, or further your career in the mining space, then this is the perfect growth platform for you. This is an excellent opportunity for those wanting to get their foot in the door of the mining industry and be supported while they expand their electrical knowledge.
This is a local role, on a 5/2 DIDO roster (Monday-Friday) with excellent pay, consistent overtime, and accommodation provided.
ABOUT YOU: ... Click here to view more detail / apply for Electrician ? DIDO

Programmed Skilled Workforce is a leading provider of managed labour, staffing and training services. We currently have an ongoing position for an experienced Transport Forklift Driver for the Minchinbury area.
Ongoing Monday to Friday 11am - 7pm
Your core responsibilities will include:

Operating a Forklift
Loading/unloading B Doubles & Semi trailers
You may be required to restrain loads
Experience opening and closing taught liners
Managing weight distributions
Consignment notes management

Requirements:

Current & valid Forklift (HRW LF) licence
Previous transport forklift experience

If you believe you are suited to the role, please click 'APPLY NOW' or call Ph:
Who we are
As one of Australia's largest employers, we work with great companies all around Australia and New Zealand to give you the best opportunities to work when and where you want to. ... Click here to view more detail / apply for Transport Forklift Driver

We save & change lives. At Children?s Cancer Institute we believe that a life should be long. Cancer cuts life short for hundreds of children every year, before they?ve even had a chance to make their mark. We aim to not only improve their quality of life but eradicate the cause of their pain.
As the only independent Medical Research institute in Australia focused on childhood cancer, our purpose is to translate and discover (through world class research), new treatments that will cure cancer and reduce the side effects in children and adolescents.
Choose to be part of a team that will nurture your talent, so you too can contribute to this purpose. Together, we can and we will cure all children of cancer. It?s not if. It?s when.
The Leukaemia Biology Group at Children?s Cancer Institute undertakes highly translational research focused on the development of novel ... Click here to view more detail / apply for Research Assistant

About Us

MKCB Pty Ltd trading as MKCB Construction and Engineering is a multi-disciplined company that specialises Structural, Mechanical and Piping job servicing and providing quality and integrity in oil and gas, mining and offshore sector. With our ongoing and upcoming projects from our satisfied clients our dedicated management teams and skilled employees have built a strong reputation for excellence. With stability and continuity at the core of our company, our experienced management team ensures consistent quality and timely project completion.

About the Roles and Skills are :

-Excellent in Welding exotic materials such as carbon steel, aluminium, stainless ,chromoly, manganese and duplex.

- Reading and interpreting technical drawings, blueprints, and specifications to understand project requirements and determine the appropriate fabrication methods.

- Selecting and preparing materials, such as metal plates, pipes, or structural components, for fabrication by cutting, grinding, or shaping them.

- Operating various tools and equipment, including welding machines, gas torches, shears, presses, and drills, to perform fabrication tasks.

- Assembling metal parts using welding, bolting, or riveting methods, ensuring proper alignment and structural integrity.

- Conducting inspections and quality checks on completed work to verify adherence to specifications and industry standards.

- Conducting repairs, modifications, or maintenance tasks on existing metal structures, equipment, or products.

- Collaborating with engineers, designers, or other team members to troubleshoot fabrication issues, offer suggestions, and contribute to the improvement of fabrication processes.

- Adhering to safety procedures, following safety guidelines, and wearing appropriate personal protective equipment at all times.

- Maintaining fabrication tools, equipment, and workspaces, ensuring they are clean, organized, and in good working condition.

- Staying up to date with industry trends, advancements in fabrication techniques, and safety regulations.

- At least 5 years experience as Special Class welder

Employer questions
Your application will include the following questions:
Which of the following statements best describes your right to work in Australia?
How many years' experience do you have as a Special Welder?
Do you have professional welding experience?
Do you hold a Construction Induction Safety certificate (White Card)?
Which of the following confined space courses have you completed?

Salary Package : $75,000 per annum

About the venue and the company

The Squire's Landing is the sort of restaurant and bar James Squire himself would have loved to dine and drink in. With 270 degree views of Sydney harbor from the Opera House to the Harbour Bridge its an amazing location.

In our architecturally designed kitchens unique wood-fired rotisserie's, char grills and a smoker are the main focus of the menu. Using wood fire to enhance the flavors of the produce in mind. Our ground floor kitchen cooks for the brew house whilst our upstairs kitchen cooks for our 200 seat restaurant.

Joining us also means you get:

Staff meals provided every day
Staff Benefits program - including 25% discount in venues
Opportunities for development and career progression
Ongoing support and training


You will be:
• Designing menus, calculating food and labour expenses, and sourcing food supplies
• Overseeing the quality of dishes throughout preparation and presentation
• Collaborating on food preparation concerns with Managers, Dietitians, and kitchen and wait staff
• Showcasing techniques and offering guidance on cooking methods
• Preparing and cooking meals
• Outlining and enforcing sanitation standards
• May recruit and train personnel
• May freeze and preserve food items

You will possess the following qualities:

Reliable, punctual and organised.
Passionate about what they do, innovative and experienced.
Casual and Full Time Position
Experience is essential
Have experience in a kitchen serving a 200+ seat restaurant.
Work fast, clean and motivate team by leading by example.
Deliver high quality dishes, consistently well, in a fast-paced, busy environment.
Following and enforcing workplace health and safety requirement.
Working with head chef to meet the food and kitchen budget.
Most importantly a great attitude is a must.

Our client in Victoria is looking for someone to conduct and coordinate engineering activities and ensure effective handover of the project to routine operations beginning of 2026. The focus of this role will be to act as the Operational Readiness representative for the Maintenance and Utilities department and conduct engineering and maintenance services to support project delivery of the production areas (Bulk Process and Fill/Finish).

Skills and Qualifications:

• Act as Engineering Plant owner during project throughout key stages of Design, Procurement, FAT, Installation, Commissioning, SAT, Qualification and Handover.
• Develop and provide equipment reliability and process engineering expertise for the project including FMEA, creation of maintenance plans and spare parts assessments.
• Ensure that all engineering tasks related to Operational Readiness are completed in a timely manner to allow smooth transition through completion of qualification, validation, PPQ batches and onward to routine production.
• To investigate, develop and implement solutions to engineering problems related to new manufacturing equipment and systems.
• To develop and apply engineering standards and procedures and provide advice on issues within the engineering field.
• To liaise with external Vendors/Consultants and internal Engineering, Production and Quality colleagues to achieve project objectives
Act as Engineering Plant Owner, establish and provide Subject Matter Expertise for the project’s production equipment (Bulk Process & Fill/Finish) and support project delivery through the following:
• Review design specification documents (P&IDs, flow paths, specifications)
• Review differences between existing BACE I and new BACE II plants
• Review 3D models
• Lead Device (Instrumentation) and Criticality Assessments
• Provide input for maintenance procedures (i.e. access to equipment for job tasks)
• Liaise with the data entry team to coordinate asset creation in SAP
• Lead maintenance FMEA
• Liaise with maintenance teams and planning departments to develop Preventative Maintenance plans (PMs).
• Develop mechanical and E&I spare part requirements
• Review and participate in FAT’s
• Participate in safety assessments (e.g. HAZOP, LOPA)
• Support installation, commissioning and qualification activities to facilitate knowledge transfer from the project to operations
• Organise and/or manage staff/contractors to perform work as required.
• Raise and implement Process Change Requests and Deviations/CAPAs where appropriate.
• Liaise with external Vendors/Consultants and internal Engineering, Production and Quality groups to ensure project objectives of Safety, Quality, Schedule, Scope and Cost are achieved.
• Develop and implement the long-term technical master plan for the area to ensure effective lifecycle management of the equipment and provision of critical spare parts.
• Develop and maintain technical and operating documentation, and conduct training activities, as required.
The successful candidate must have relevant experience in a similar role and a relevant bachelor degree is preferred.

Senior Data Analyst Required - South Western Sydney - 18 month FTC - Greenfield Azure / Databricks Your new company Hays are partnering with a company based in South Western Sydney who are seeking a Senior Data Analyst to join their growing team. Your new role The data analyst will lead all reporting, visualisation, data modelling and stakeholder engagement for insights on the greenfield transformation. What you'll need to succeed - Min 4 years' experience in Data Analysis with SQL Server - Experience on Azure Databricks transformations, Azure Data Factory also highly regarded - Expertise in SQL Server and End-to-end Power BI Development - Data modelling and visualisation skills - Knowledge of data governance tools within Azure preferred with tools such as Purview or Synapse What you'll get in return - Annual salary ranges from $100,000 - $110,000 + super - 35 hour working week - 9-day fortnight in the form of an RDO if overtime requirements of min 30 mins per day are met - Valuable experience in a greenfield Azure implementation as a data analyst, laying the foundations for Advanced Analytics & AI What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. Please click here to apply.

Heston MRO Pty Ltd (Heston MRO) is a provider of world class aircraft maintenance services to a wide variety of domestic and international airlines.
With operations at all major airports in Australia including Brisbane, Coolangatta, Sydney, Melbourne, Adelaide and Perth, we are seeking someone ready to work in a close knit, supportive team.

Our Licensed Aircraft Maintenance Engineer Opportunity
Based at Perth International Airport Terminal, we are seeking a CASA or EASA B1.1 Licensed Aviation Maintenance Engineers, ideally experienced in a line maintenance environment, with any combination of the following coverage:
• B737NG and Max
• B787
• A320
• A330
• A350
• B777
Please clarify in your application your recent experience with the aircraft types and confirm your licence coverage.
We have multiple permanent roles as well as some casual opportunities.
If you have a preference for FT or Casual please advise in your application

What success looks like:

- Australian Citizen or Permanent Resident, or a visa that has full working rights
- CASA Licence B1, or B1 AND B2 on B787 (RR Trent) with at least 2 other type ratings, or ability to convert within a 6 month period from a foreign licence
- At minimum, 3 years as a Licensed Aircraft Engineer
- You must have completed 6 months of certifying, in the last 2 years of experience on your relevant type ratings
- ASIC and ADA eligibility
- A strong work ethic and safety mindset, understanding systems of safe work
- Excellent communication skills- all aspects

We are an equal opportunity employer and encourage Diversity and Inclusion throughout our workforce.

Please note our starting salaries for continuous working shift patterns are:-

Heston MRO encourages a workforce that feels valued and empowered in both their professional and personal lives, we do this by adhering to our PROTAC values and encouraging and manifesting our Code of Culture.

Our Heston People propellers, "propel" us to meet our people verticals we focus on across our workforce. Some of those include, social opportunities, monthly company newsletter, referrals program, career development pathways and internal mobility and regular feedback.

Our work environment includes open door policies, a hands on management team, a recognition and rewards program and innovation and investment in new systems.

Those 'fluffy' extras aren't all that important to many in our workforce as the feedback is that they just value our culture, however we do provide some of course which include, Christmas gift vouchers, catered Christmas celebration, gift vouchers, flu jab and an Employee Assistance Program.

Like the sound of us... then please do apply by clicking on the link on this page. We are waiting excitedly for your application!

Job Types: Full-time, Permanent

Permanent position for Commercial Electricians available! Are you currently looking for a permanent opportunity in a company invested in growth and development in their employees and stature? Look no further! Your new company
Hays is currently partnered with a highly established Electrical Company in search of Commercial Electricians interested in a Permanent Position for local work in Projects across the Metro Area.
The company mentioned has been operating within the Perth market for over 20 years and is planning on expanding its workforce across several sectors, including construction, maintenance and audiovisual. Their team has ongoing projects across the Perth Metro Area and are chasing fully experienced commercial electricians for a suitable & relevant team. Current ongoing projects include BHP, St John of God, Coles, etc. Your new role

Based on your experience in the commercial sector, you will be placed in the relevant team. (Construction, Maintenance, Audiovisual)
Hours - 6am-2:30pm with 1 RDO.
When assigned a project, you will be there for the whole project, making you familiar with the team, site and also for your convenience.
A vehicle is provided with a fuel card, or an allowance.
You will be given the opportunity to grow, and are given the ability to diverge to a different sector or role (white collar, etc) if you so choose.

What you'll need to succeed

A Grade Electrician / Australian Unrestricted Electrical Licence
Commercial Electrician Experience
White Card
Australian Driving Licence
LVR/CPR
Open Cable Licence (Desirable)
Work in a team environment
Strong Focus on Health and Safety
Excellent communication skills and high attention to detail.
Highly motivated.

What you'll get in return

$38 - $55 - based on experience
Weekly Pay
Potential for Overtime with Penalities
Strong team culture,
Convenient Work locations - 1 Site for the majority of projects.
Vehicle + Fuel Card or Allowance
$250 to be on call.
Strong Culture (Culture Clubs, Bi-yearly Events)
A 1% per year loyalty scheme is split quarterly.
Courses provided if necessary.

What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Please click here to apply.

Great Australian company to work for Apply now to start
Location:
Western Sydney. North Sydney
Salary: $80,000 - $90,000 per year
Job Type: Full-Time
Start Date: Immediate or New Year

Job Description:
Our client, who is Australian owned and operated, is seeking a skilled CNC Machine Operator with experience of operating machines to join our client. This is a full-time position offering a competitive salary between $80,000 and $90,000 per year.
Key Responsibilities:

Operate and maintain CNC machines, ensuring precision and quality in all tasks.
Utilise Amada machine experience to optimise production processes.
Performing routine maintenance and troubleshooting of equipment.
Collaborate with team members to meet production goals and deadlines.

Qualifications:

Proven experience as a CNC Machine Operator.
Specific experience with Amada machines is highly desired.
Strong attention to detail and commitment to quality.
The ability to work independently and as part of a team.
Excellent problem-solving skills.

Benefits:

Competitive salary.
Opportunity to start immediately or in the new year.
Comprehensive benefits package (health, dental, retirement plans, etc.).


What you need to do now To discuss our vacancies in detail please call Nabil on 0490127043 or, click 'apply now' to forward an up-to-date copy of your CV. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Please click here to apply.

Halgan Pty Ltd Position Overview The Field Commissioning and Compliance Specialist is responsible for the on-site field commissioning of liquid waste treatment products such as pumping stations, grease traps, and pre-treatment systems. The role ensures that all installations comply with relevant plumbing and drainage standards, specifically AS3500.1:2003. This position also involves overseeing the maintenance and asset management of liquid waste treatment facilities, conducting research and development (R&D) for regulatory compliance, and assisting with product certification processes in line with AS1546.1 and other applicable standards. Benefits Career Development Opportunities Opportunities to advance into senior technical or compliance management roles, depending on performance and company needs. Task & Responsibilities On-Site Field Commissioning Commission and oversee the installation of products such as pumping stations, grease traps, and pre-treatment systems. Ensure that all installations comply with AS3500.1:2003 plumbing and drainage standards. Liaise with contractors, plumbers, and engineers to ensure correct installation of valving, connections, and fittings. Perform on-site troubleshooting and provide technical guidance during commissioning phases. Plumbing & Drainage Compliance Ensure all systems, including piping, fittings, and connections, adhere to AS3500.1:2003 standards during the production and installation processes. Verify and inspect plumbing layouts and schematics for compliance before and after installation. Assist in resolving any compliance-related issues that arise during commissioning or product development stages. Liquid Waste Asset Management Manage the maintenance schedules and asset management of liquid waste treatment facilities, including pump servicing, aeration system servicing, and transfer system servicing. Conduct routine inspections and maintenance to ensure the longevity and efficiency of liquid waste treatment systems. Track and document service records and operational performance of key assets. Develop maintenance plans and schedules to prevent system downtime and improve operational efficiency. Research & Development (R&D) for Compliance Participate in R&D initiatives aimed at developing and improving products to ensure compliance with AS3500.1:2003 and other regulatory standards. Work closely with the engineering team to ensure new product designs are compliant with relevant codes and regulations. Test and evaluate new technologies and materials to enhance product performance and compliance. Quality Assurance & Certification Assist with obtaining AS1546.1 certification for products, ensuring all quality and safety standards are met. Collaborate with the Quality Assurance (QA) team to integrate relevant codes and standards into the product testing and approval processes. Prepare and maintain documentation required for certification and compliance reporting. Parts & Product QA Manage the QA process for both individual parts and complete products, ensuring that they meet performance, safety, and compliance standards. Conduct thorough inspections and testing of parts to identify defects or non-conformance with specifications. Develop and implement QA protocols to maintain high standards in both production and field installations. Collaborate with suppliers and vendors to ensure that all incoming parts meet company and industry standards before use in production. Qualification & Experience Key Skills & Competencies Technical Competencies Strong understanding of AS3500.1:2003 and AS1546.1 compliance standards. Expertise in plumbing, drainage systems, and liquid waste treatment systems. Proficiency in commissioning and troubleshooting liquid waste treatment products, including pumping stations, grease traps, and aeration systems. Knowledge of asset management and maintenance protocols for liquid waste facilities. Problem-Solving & Analytical Skills Ability to analyse complex technical issues and develop effective solutions. Strong diagnostic skills for identifying and resolving installation and maintenance problems. Communication & Teamwork Excellent verbal and written communication skills for liaising with contractors, plumbers, engineers, and regulatory bodies. Strong team player with the ability to collaborate across departments, including R&D, production, and QA teams. Education & Experience Degree in Plumbing, Engineering, Environmental Science, or a related field (preferred). 3+ years of experience in liquid waste treatment systems, plumbing, or compliance roles. Proven experience with product certification and regulatory compliance processes. KPIs (Key Performance Indicators) Compliance Rate : Percentage of installations compliant with AS3500.1:2003. Maintenance Efficiency : Number of service calls resolved within the scheduled maintenance timeframe. Product Certification : Number of products successfully certified to AS1546.1 and other relevant standards. Commissioning Success : On-time completion of field commissioning tasks without major issues or delays. Working Conditions Field-based and factory work, with regular travel to installation sites and treatment facilities. Occasional office-based tasks related to reporting and documentation.   About Company Halgan Pty Ltd, an Australian owned company, established in 1994, specialises in all aspects of sustainable environmental treatment solutions. From the initial manufacturing of treatment products, with a state of the art rotomoulding machine, right through to the consultation and sales process, plus after sales service and greasetrap pumpouts. Halgan Pty Ltd provides a superior product with stringent quality assurance. Salary: $28-29 Job Publish: 26-11-2024 Job Expire: 26-12-2024 Please click to View more detail / apply .

Job description
Heston MRO offer services to a diverse range of domestic and international airline companies and has been operating since 1992. Some of the services include aircraft storage, engine on-wing maintenance, defect rectification, ground support, refuelling, certification of airworthiness and parts and components.

Our vision is to be a true one-stop MRO with a reputation for excellence, reliability for quality service with technical capabilities - a truly agile and customer focused independent MRO in Australia and beyond. We are committed to maximising and strengthening domestic markets and international growth. We care about our employees and our clients and work towards long term relationships for mutual success.

We are currently seeking Aircraft Maintenance Engineers to work on a fulltime basis at our Perth WA Station.

Selection Criteria:
The successful candidates must have:
Cert IV in Aeroskills or equivalent
Line Maintenance experience is preferable
Hands-on experience and knowledge working on commercial aircraft in a line maintenance environment
A familiarity of maintenance regulations issued by the appropriate regulatory authority
Possession of a valid state driver's licence
A high level of attention to detail
A high standard of written and spoken English language
Australian citizen, permanent resident or hold a required visa-type permitting work in Australia
Be in possession of a valid state driver's licence
ASIC and ADA eligibility
Possess a high standard of both written and spoken English and great attention to detail
You must also be disciplined to work alone, or in a team.

We regard safety as an essential part of all our operations and applicants must be familiar with maintenance regulations.

Heston MRO is an equal opportunity employer and if you are a motivated self-starter with the skills and experience we are seeking and wish to have the opportunity to work in a multicultural, dynamic and successful environment then we would be interested to hear from you.

Please note the salary for these roles is starting at $86,004 base for continuous shifts patterns.

To submit your expression of interest with Heston MRO please click the "Apply" link below and include your Cover Letter, Resume, and relevant qualification.

Please note: ONLY shortlisted candidates will be contacted.

Job Types: Casual, Permanent, Full-time

Schedule:
10 hour shift
8 hour shift
Afternoon shift
Day shift
Evening shift
Monday to Friday
Public holidays
Rotating roster
Shift work
Weekend availability

Supplemental pay types:
Overtime pay
Ability to commute/relocate:

Australia (Preferred)
Work Location: In person
How to apply
Apply through this website
Salary
$80,001 - $100,000