On behalf of our client, Clough Projects Pty ltd, we are hiring. This role will be based on site as part of the Clough Waitsia Project Stage 2 Project, Karratha WA, and is responsible for the operation of all sizes of Terex Franna, Pick and Carry type cranes to lift, move and place a variety of construction equipment and materials.
Tasks & Duties:
• Operate pick and carry crane to lift, transfer and place loads to various levels and locations within the working range and safe lifting capacity of the crane.
• Assess the condition of the ground prior to travelling, operating or lifting with the crane.
• Inspect crane mechanisms or lifting accessories to prevent malfunctions or damage.
• Ensure that the crane is set up on level ground and all safety mechanisms are operable before attempting to lift and place a load.
• Ensure that the crane is safe for use by the means of conducting thorough daily pre-start inspections as per the manufacture’s recommendations.
• Establish load weights and check them against lifting capacities to prevent overload.
• Observe and follow the signals given by a suitable dogman or rigger in charge of directing a lift.
• Shut down and leave crane in a safe manner at all times when leaving the crane.
• Conduct scheduled maintenance inspections.
• Read and interpret lift plans / procedures.
• Be willing to participate in rigging activities (providing qualified) other than crane operation
• Execute work in line with Management System requirements.
• Other duties as directed
Skills and Experience:
• Minimum 3 years experience performing Crane Operation work in a mining construction environment.
• Experienced in the inspection, maintenance and operation of all types of Franna cranes.
• Demonstrated experience performing dynamic crane lifts
• Experience with heavy lifts up to 20t.
• Sound technical knowledge of all aspects of crane operation including but not limited to load assessment, lifting equipment identification and machine limitations.
• Ability to take into account conflicting activities and environmental conditions that may affect the lifting condition.
• Knowledge of safe lifting principles.
• Knowledgeable at developing, implementing and following risk assessments.
• Experience working under Permit to Work Systems and adhering to Permit to Work conditions.
• Ability to use tools and equipment in a safe and appropriate manner.
• Demonstrated ability to conduct work safely at heights
• Desirable
• Experience working in a cross-cultural environment
• Innovative and practical approach to problem solving
• Good time management skills
Qualifications:
• Mandatory
• High Risk Work License – CN – Non-Slewing Mobile Crane
• Construction Blue/White Card
• Current Australian “C” Class Driver’s Licence
• Desirable
• Current Australian “HR/MR” Class Driver’s Licence
• Working at Heights
• High Risk Work License – EWP/DG
Salary: $65,835 to $70,000 per annum
Location of work: Karratha, WA 6714
Tasks & Duties:
• Operate pick and carry crane to lift, transfer and place loads to various levels and locations within the working range and safe lifting capacity of the crane.
• Assess the condition of the ground prior to travelling, operating or lifting with the crane.
• Inspect crane mechanisms or lifting accessories to prevent malfunctions or damage.
• Ensure that the crane is set up on level ground and all safety mechanisms are operable before attempting to lift and place a load.
• Ensure that the crane is safe for use by the means of conducting thorough daily pre-start inspections as per the manufacture’s recommendations.
• Establish load weights and check them against lifting capacities to prevent overload.
• Observe and follow the signals given by a suitable dogman or rigger in charge of directing a lift.
• Shut down and leave crane in a safe manner at all times when leaving the crane.
• Conduct scheduled maintenance inspections.
• Read and interpret lift plans / procedures.
• Be willing to participate in rigging activities (providing qualified) other than crane operation
• Execute work in line with Management System requirements.
• Other duties as directed
Skills and Experience:
• Minimum 3 years experience performing Crane Operation work in a mining construction environment.
• Experienced in the inspection, maintenance and operation of all types of Franna cranes.
• Demonstrated experience performing dynamic crane lifts
• Experience with heavy lifts up to 20t.
• Sound technical knowledge of all aspects of crane operation including but not limited to load assessment, lifting equipment identification and machine limitations.
• Ability to take into account conflicting activities and environmental conditions that may affect the lifting condition.
• Knowledge of safe lifting principles.
• Knowledgeable at developing, implementing and following risk assessments.
• Experience working under Permit to Work Systems and adhering to Permit to Work conditions.
• Ability to use tools and equipment in a safe and appropriate manner.
• Demonstrated ability to conduct work safely at heights
• Desirable
• Experience working in a cross-cultural environment
• Innovative and practical approach to problem solving
• Good time management skills
Qualifications:
• Mandatory
• High Risk Work License – CN – Non-Slewing Mobile Crane
• Construction Blue/White Card
• Current Australian “C” Class Driver’s Licence
• Desirable
• Current Australian “HR/MR” Class Driver’s Licence
• Working at Heights
• High Risk Work License – EWP/DG
Salary: $65,835 to $70,000 per annum
Location of work: Karratha, WA 6714
