Based in Shepparton Victoria 3630,  J. Furphy and Sons service a diverse range of industries such as food, dairy, brewing, chemical, petroleum, water, and oil and gas, many of which have varying acceptance criteria for surface finish, code requirements and operating conditions that require careful consideration during the design and fabrication phases of the project.
 

We are currently recruiting for several qualified and experienced Pressure Welders to join our base at Shepparton VIC 3630.


The successful candidate will need to undertake and possess:

- Perform complex mechanical installations per engineering direction.
- Read and comprehend construction drawings and specifications.
- Lay out and install piping, equipment, and other mechanical systems in compliance with construction drawings and specifications.
- Weld and repair pressure vessels and tanks to relevant standards.


Qualification and Skills:

- Certificate III in Engineering-Fabrication Trade or equivalent
- Ideally have a minimum of 3 years’ experience


Salary range is $70,000 - $85,000pa commensurate with experience

Several Full-time Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted applicants will be contacted

Trust Medical Recruitment is seeking a VR General Practitioner to join a busy clinic in Shellharbour, NSW. The clinic is a well-established, rapidly growing Medical Centre that can offer flexible working hours.

Essential Skills and experience.
• VR Registered General Practitioner, Fellowship or equivalent and current valid AHPRA registration, Or relevant
• Recognised qualifications and an ability to obtain the registration,
• Must have two years of experience as General Practitioner,
• Strong work ethics and commitment to practicing the best medicine in the best way for our patients.

The clinic offers the following:
• Mixed Billing
• Minor Surgical Procedures
• Immunisation
• ECG Monitoring
• Spirometry
• Home Visits to established patients
• Pre employment Medicals
• Instant Drug test and Breathalyzer
• Wound Care
• Women's Health
• Skin Clinic
• Workers compensation Claims consultations
• Recreational Medicals
• Men's Health
• Paediatrics & Childhood health check
• Travel Medicine
• Audiometry

Flexible work hours
Job Type: Full-time
Salary: $70,000.00 to $250,000.00 /year

Horsham Night Watch Security Pty Ltd As a security officer at Horsham Night Watch Security Pty Ltd, you'll patrol assigned areas, monitor surveillance systems, and respond to incidents to ensure safety. You’ll maintain detailed reports and collaborate with local authorities when necessary. Strong communication skills and a commitment to community safety are essential for this role.   Benefits •    Competitive salary based on experience along with 11.5% superannuation. •    Opportunities for career advancement and professional development. •    Paid time off and holidays. •    Flexible work schedule.   Task & Responsibilities •    Conduct regular patrols of assigned areas, including buildings, parking lots, and other facilities, to detect and prevent unauthorized access, vandalism, and other security breaches. •    Manage and control access to secure areas by verifying identification, checking credentials, and authorizing entry for employees, visitors, and contractors. •    Respond quickly and appropriately to alarms, security breaches, and emergencies, including medical incidents, fire alarms, and disturbances, ensuring the safety of all individuals on-site. •    Document and report all incidents, suspicious activities, and security breaches in detailed logs and reports, ensuring that all relevant information is accurately recorded. •    Perform searches of individuals, vehicles, and personal belongings when necessary to prevent the entry of prohibited items into secure areas. •    Assist employees, visitors, and the public by providing directions, answering questions, and offering support during emergencies or other security-related situations. •    Ensure that all security equipment, such as cameras, alarms, and communication devices, are properly maintained, functional, and ready for use. •    Enforce site-specific rules and regulations, including preventing loitering, smoking in prohibited areas, and ensuring compliance with safety protocols. •    Collaborate with local law enforcement agencies, providing information and support during investigations, and coordinating responses to serious incidents. •    Manage crowds during events, protests, or other gatherings, ensuring that order is maintained, and that participants and bystanders remain safe. •    Participate in ongoing training to stay current with security protocols, emergency procedures, and the latest security technologies and trends.   Qualification & Experience Qualifications: •    Education: • AQF Certificate I or 2 in Security or compulsory secondary education. •    Experience: Minimum 1 years’ experience in security, law enforcement, or a related field is an advantage.   Requirements : •    Communication Skills: Strong verbal and written communication abilities. •    Observational Skills: Keen attention to detail and the ability to identify potential security threats. •    Physical Fitness: Capable of standing, walking, and patrolling for extended periods. •    Technical Skills: Familiarity with security systems and equipment, including surveillance cameras and alarm systems. •    Interpersonal Skills: Ability to interact positively with the public and de-escalate situations as needed. •    Flexibility: Willingness to work nights, weekends, and holidays as required. •    Background Check: Must pass a background check and drug screening.   About Company Horsham Night Watch Security Pty Ltd, also known as Wimmera Security Service, has been a trusted security provider in Horsham and its surrounding areas for over 30 years. Our mission is to deliver exemplary security services with professionalism, honesty, and reliability, ensuring peace of mind for our clients. As a locally owned company, we prioritize integrity, customer focus, and excellence. Our qualified team offers a comprehensive range of services, including alarm response, static guards, cash escorts, and 24/7 nightly patrols, all tailored to meet your individual security needs. At Wimmera Security Service, we are committed to maintaining our reputation as a dependable partner in safety. Contact us today to find out how we can help protect what matters most to you. We take pride in providing a security firm you can truly depend upon and trust, with a proactive approach that ensures high-quality service for every client. Salary: $73150-85000 Job Publish: 26-11-2024 Job Expire: 26-12-2024 Please click to View more detail / apply .

LS Precast are currently looking to recruit an experienced and qualified Civil Engineer to join their team in Benalla VIC 3672.

The successful candidate will need to undertake and possess:

- Work with stakeholders to ensure that the design and construction methods for each element meet standards.
- Support the procurement process of plant, equipment & material to support time and budget expectations to manufacture precast concrete elements.
- Development and manage daily cost reporting against multiple elements which include but are not limited to –
raw materials, cast in items, consumables and labour.
- To provide on-site engineering support to meet program requirements.
- Provide technical knowledge for manufacturing general precast, Pre-stressed & post tensioned concrete elements.
- In conjunction with stakeholders, develop & review SWMS & work procedures to support manufacturing of precast element.
- Monitoring key precast concrete manufacturing requirements and implementing prompt corrective action if required, to ensure they are achieved in line with agreed specifications.
- Ensure that work lots are monitored and maintained to support delivery of completed units to customers.
- Support the Senior Project Engineer with accurate & timely information for current scope & any future tendered work


Skills and Abilities:

- Bachelor’s degree in Civil Engineering or related field.PE license preferred.
- 3 years of civil engineering experience.
- Proficiency in CAD and design tools.
- Knowledge of construction processes and regulations.
- Strong problem-solving, project management, and communication skills.

Salary range is $125,000 - $145,000pa commensurate with experience

Fulltime Position available



Applications open 26th of November 2024 and closes on 26th December of 2024.



If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Three Rivers Machinery are currently recruiting an experienced and qualified Supply, Distribution and Procurement Manager to join their team in Warren NSW 2824.

The successful candidate will need to undertake and possess but not
Limited to:

- Determining, implementing and monitoring purchasing, storage and distribution strategies, policies ad plans
- Preparing and implementing plans to maintain required stock levels at minimum cost
- Negotiating contracts with suppliers to meet quality, cost and delivery requirements
- Monitoring and reviewing storage and inventory, to meet supply requirements and control stock levels
- Liaising with other departments and customers concerning requirements for outward goods and associated delivery
- Overseeing the recording of purchase, storage and distribution transactions
- Demonstrates effective communication and problem-solving skills

The ideal candidates must have an eye for details; show pride in their work as well as having a ‘can do’ attitude.

Skills & Attributes

- Bachelor’s degree in supply chain management, Logistic, Business or related field required
- Minimum of three years of work experience in purchasing related field preferred.

Salary range is $80,000 - $90,000pa commensurate with experience.

Full time position available.


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted.

AUS-1 International Pty Ltd is an Automotive Electrical & Airconditioning company specialised in Heavy & Light Vehicles based in NSW. With years of experience and continuous technical development, they look after government and privatesector.AUS-1 International Pty Ltd is looking for experienced MECHANICAL TECHNICIANS to join their team of professionals on a full time and permanent basis.

To be considered for this role you must possess the following:
QUALIFICATION - Mechanical Technician trade qualification or equivalent
TECHNICAL - Strong mechanical knowledge on a wide variety of vehicle and equipment and deliver high standards of work that consistently meet or exceed customer, technical, and/or manufacturer specifications and standards
PROFESSIONAL - Demonstrate a professional, courteous, and respectful behaviour at all times
COMPANY REPRESENTATIVE - Contribute to achieving company goals and objectives
SKILLS – Strong communication skills, Strong diagnostic skills
TRAITS – Self-motivated, organised, punctual, reliable and have great work ethics
TEAM MEMBER - Participate as a proactive team member

Duties of the Role, your duties will not be limited to the following:
Perform repairs and maintenance in accordance with relevant technical specifications and standards
Read and interpret wiring diagrams and technical specifications accurately
Perform works safely and in an environmentally responsible manner
Diagnose mechanical faults accurately and in efficient manner
Conduct repairs and maintenance in accordance with manufacturer and technical specifications
Complete documentation accurately, including job cards, service sheets, parts records, timesheets, or other information as required
Fault find, and diagnose mechanical problems accurately and thoroughly
Use and maintain diagnostic equipment correctly and in accordance with manufacturer specifications

If you are looking for a change of environment in your area of expertise or would like to advance your current skills, and have met all the criteria above please apply now!
Salary: Between $70,000 and $75,000 per annum + Super

Lanyonscapes provides high quality design, development, installation and project management of landscape solutions including, revegetation, irrigation, maintenance, erosion and sediment control treatments. They have delivered and completed projects from small jobs to multimillion dollar projects over several years.

Lanyonscapes is looking for highly skilled and experienced Pressure Welders to join their team on a full-time and permanent basis.

Job location: Various Locations in QLD

The role includes but is not limited to:
Shaping and bending metal sections and pipes using hand and machine tools, and by heating and hammering
Aligning parts to be joined using hand tools and measuring instruments
Studying blueprints, drawings and specifications to determine job requirements
Selecting, cleaning and preparing metal stock
Cutting marked-out metal sections and shapes using hand tools, flame cutting torches and metal cutting machines
Joining metal sections using various welding techniques, bolting and riveting
Examining welds for width of bead, penetration and precision
Finishing products by cleaning, polishing, filing and bathing in acidic solutions
Cleaning and smoothing welds by filing, chiselling and grinding

Desirable traits and skills that will highly be regarded:
Relevant certification and qualification
Proven experience in various welding and fabrication techniques
Ability to read and interpret engineering drawings, specifications, and blueprints
Experience working with a variety of materials, including steel, aluminum, and other alloys
Familiarity with a range of hand and power tools, including grinders, drills, and cutting tools
Strong attention to detail and the ability to conduct quality checks on completed work
Ability to work independently or as part of a team to complete assigned tasks
Knowledge of safety procedures and regulations to prevent accidents and injuries in the workplace
Strong communication skills
Self-motivated, organised, punctual and reliable
Must have great work ethics

Salary: Between $70,000 and $75,000 per annum + Super
If you meet the above criteria and would like to be considered for this position, please apply now!

Cowra McDonald’s Restaurants (Maccas) are looking for great people! We are currently looking to recruit an experienced and qualified Restaurant Manager to join their team in Cowra NSW 2794

This role will suit a highly motivated, operations focused applicant who has completed LTS as a minimum has the skills to motivate a team and whilst being a professional employee but also having great fun along the way! Work directly with the licensee and get in control of your own future.

Duties and Responsibilities:

- Shift Management including training
- Set goals and action plans for the Restaurant within Shift Supervisor / Manager Responsibilities.
- Ensuring outstanding customer service and operations are a focus each day you work.
- Implementation and follow up of Food Safety procedures.
- Oversee and manage staff, with selected Department responsibilities
- Ability to achieve financial budgets.
- Maintain WH&S standards and cleanliness within the restaurant
- Ensure security is strictly always adhered to.

Skills & Experience:

- Ability to demonstrate McDonald’s KPI historical results / performance
- The ability to train and develop team members
- Proven staff management and leadership skills
- A hands-on approach
- Impeccable presentation and clear, concise communication
- A focus on policies and procedures
- A passion for delivering high standards of customer service
- Attention to detail

What we offer

- Above award salaries *great bonus scheme
- Relocation assistance available for the right candidates
- Multiple positions available
- Assured Future Career Growth
- You have total control over your career progression
- Continuous training
- National Accredited Certificate II, III and IV available
- Car/s Australian and Overseas Holidays / Corporate events all paid for.

Salary range is $65,000 - $75,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If this unique opportunity sound like one you would like to pursue, please click on Apply. Only shortlisted candidates will be contacted.

Rhys Evans Farm Machinery are currently looking to recruit an experienced and qualified Mechanical Engineering Technician to join their team in Colac West VIC 3250.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors (change to match what company does)
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors (change to match what company does)
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment


Salary range is $70,000 - $85,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

NH Foods (Thomas Borthwicks & Oakey Beef Exports) are currently looking to recruit experienced and qualified Mechanical Engineering Technicians to join their team in Mackay and Oakey.

The successful candidate will need to undertake and possess:

- Running and analysing diagnostic tests on a wide range of agricultural machinery/equipment and tractors
- Maintain, test and repair/replace mechanical assemblies on heavy plant/machinery and tractors
- Perform assessments and repairs in the field and workshop
- Perform preventative maintenance
- Fabricate and assemble new or modified mechanical components for products such as machinery, equipment and measuring instruments
- Work within timeframes and servicing schedules and maintain records
- Installing equipment and testing operations

Skills and Abilities:

- Ideally have Diploma in Mechanical Engineering or related
- A minimum of three years’ experience
- The ability to work in a team environment

Salary range is $70,000-$90,000pa commensurate with experience

Fulltime Position available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

NH Foods (Thomas Borthwicks & Oakey Beef Exports) are currently looking to recruit an experienced and qualified Skilled Meat Workers to join their teams in Mackay and Oakey. Skilled Meat Workers of all types are required but not limited to, slicers, boners etc.

The successful candidate will need to undertake:

Stuns and kills livestock
- Prepares carcasses for further processing by removing internal organs and hides
- Operates switching controls to direct and drop carcasses and meat cuts from supply rails to boning tables
- Cuts meat to separate meat, fat and tissue from around bones
- Washes, scrapes and trims foreign material and blood from meat
- Cuts sides and quarters of meat into standard meat cuts, such as rumps, flanks, and shoulders, and removing internal fat, blood clots, bruises and other matter to prepare them for packing and marketing
- Operates restrainer and stunning equipment
- Severs veins of stunned animals particularly pork to drain blood and facilitate dressing
- Trims and removes meat and servers animal carcasses
- May slaughter livestock according to procedures required by religious custom

Skills & Attributes:

- Must have minimum 2 years’ experience as a Skilled Meat Process Workers
- Certificate III in Meat Processing or related Qualification
- OH&S awareness
- Ability to work in a team environment

Salary range is $60,000-$85,000pa commensurate with experience

Fulltime Positions available


Applications open 26th of November 2024 and closes on 26th December of 2024.


If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

The Company:
Our client, Vacvator Pty Ltd , is now a leading supplier of high-quality vacuum trucks, dry vac and jetting trucks in Australia.

The Role:
To assemble aluminium components in accordance with work instruction & drawings from supervisor and production staff.
Conduct the work in line with the standard job builds / SOP.
Build jobs as directed by supervisors and production staff, ensure work is built to appropriate standards and within time constraints
Report broken / damaged machinery, making sure all problems are tagged out correctly
Weld and fabricate as required and to specifications
Abide by Company Health and Safety Policies and Government rules
Participate in staff consultation and communications such as Toolbox Talks and training.
4 Full-Time Positions
$65,000-$90,000 PA depending on the work experience.
Location: NSW
During the conduct of this role you may be required to:
Lift, carry and maneuvers material and equipment through physical and mechanical means
Wear specialized protective equipment
Perform general physical activities including climbing, balancing, sitting and walking
Perform whole body movements that can include twisting, squatting, kneeling, bending and crawling
Perform sustained physical activities
Operate both handheld tooling and heavier machinery
Work at height or within a confined space.

The Person:
Trade Qualified in a relevant industry is required
Health and Safety training is desirable
Extensive fabrication experience
Understanding of Safe Work Practices
Good ability to communicate effectively
Attention to detail
If you are interested in hearing more about this position, please apply with your updated resume today.

Not the job you are after? For more Welders/Fabricators roles or other automotive jobs please see our website www.justautomotiverecruitment.com.au

PHE Mining is currently seeking highly motivated Electricians to join our Bathurst team on a fixed-term basis. This is your opportunity to work with a safety-focused company while gaining experience in a mining environment.
PHEs Bathurst operations undertakes works at Cadia mine, just outside of Orange, NSW. The role involves industrial electrical and instrumentation installations, plant maintenance, shutdowns, and general improvement works in both a surface and underground environment.
If you are a qualified electrical tradesperson and have been wanting to get into, or further your career in the mining space, then this is the perfect growth platform for you. This is an excellent opportunity for those wanting to get their foot in the door of the mining industry and be supported while they expand their electrical knowledge.
This is a local role, on a 5/2 DIDO roster (Monday-Friday) with excellent pay, consistent overtime, and accommodation provided.
ABOUT YOU: ... Click here to view more detail / apply for Electrician ? DIDO

Haynes is part of a large family of companies, and we pride ourselves on the fact that we can offer solutions to our customers. We believe that people do amazing things and surround ourselves with people who are as committed as us to providing a safe and highly productive working environment for our employees. Haynes is currently seeking MR (Medium Rigid), HR (Heavy Rigid), HC (Heavy Combination), and MC (Multi-Combination) Truck Drivers to work with our client in the Mackay region. Key Responsibilities:

Safely operate MR, HR, HC, and MC vehicles while adhering to weight limits and traffic laws.
Conduct thorough pre- and post-trip inspections, reporting any defects or damage.
Maintain accurate delivery records, logs, and vehicle maintenance reports.
Assist with loading and unloading cargo as needed.
Provide exceptional customer service and represent our company professionally.

Schedule:

Monday to

... Click here to view more detail / apply for MR, HR, HC, & MC Truck Drivers

Location:  Jurien Bay, WA, AU,







26 Nov







This is an exciting opportunity for a Lineworker on a Permanent Full-Time Basis at our Jurien Bay Depot. Jurien Bay is located along the beautiful Coral Coast in Western Australia, only a short 2.5 hour drive North from Perth .  With Wildflower meadows ablaze with colour, ancient rock formations and sweeping stretches of powder-white sand, when you are not working you can be swimming, snorkelling, fishing, hiking, the list goes on..   As well as all this Jurien Bay offers a great options for the family, young and old! When enjoying the great work life balance you have with Western Power, you can work and




... Click here to view more detail / apply for Lineworker ? Jurien

Gisborne Collision Centre provides confidence in restoring vehicles to manufacturing specifications and pre-accident conditions, using the latest equipment to ensure the highest quality finish. The company is currently seeking to recruit qualified and experienced Panel Beaters to join their team in Gisborne VIC 3437.

The successful candidate will need to undertake and possess:

- Remove damaged panels and parts, and remove upholstery and accessories to gain access
- Remove dents by hammering panels
- Straighten damaged vehicles and parts using mechanical and hydraulic equipment
- Replace badly damaged sections with new or second-hand panels
- Fill depressions with plastic filler, and filing, grinding and sanding repaired surfaces
- Cut and join replacement sections using welding equipment
- Fit repaired or replacement panels on vehicles and refit body hardware such as door locks and trims
- Assist vehicle body builders in constructing and restoring custom-designed, vintage and other specialty vehicles
- Assist spray-paint vehicles

Skills & Abilities:

- Certificate III in Automotive Body Repair Technology or equivalent
- Ideally have a minimum of three years’ experience as a qualified Panel Beater
- A strong knowledge of vehicle maintenance and repair
- The ability to work in a team environment

Salary range is $70,000-$85,000pa commensurate with experience

Fulltime Position available

Applications open on 26th of November 2024 and closes on 24th of December 2024

If you are interested in this role APPLY now. Only shortlisted candidates will be contacted

Role: Motor Mechanic (Automotive Technician)
Company: Curtis Coast Automotive
Position Type: Full-time, permanent, salaried.
Salary: $73,150 plus superannuation, dependent on experience.

Are you a highly skilled motor mechanic seeking a rewarding career opportunity? Look no further!

ABOUT CURTIS COAST AUTOMOTIVE

Curtis Coast Automotive is a family owned and operated Automotive Dealership offering Nissan, Hyundai, SsangYong & Mahindra and quality preloved vehicles to the local Gladstone community since 1989.

Curtis Coast Automotive is seeking a skilled and dedicated Motor Mechanic (Automotive Technician) to join our dynamic team.

This full-time position offers an exciting opportunity to work in a fast-paced environment where your expertise in vehicle maintenance and repair will be highly valued.

Responsibilities:

• Vehicle Maintenance & Repair: Perform routine maintenance, diagnostics, and repairs on a variety of vehicles, including petrol, diesel, and hybrid engines.
• Inspections: Conduct thorough inspections to identify mechanical issues and provide accurate assessments for necessary repairs or replacements.
• Problem-Solving: Utilize advanced diagnostic tools and software to troubleshoot complex mechanical problems and implement effective solutions.
• Customer Service: Communicate with customers to explain vehicle issues, repair options, and provide professional advice on maintenance best practices.
• Safety Compliance: Adhere to all safety standards and regulations, ensuring a safe work environment and the proper use of personal protective equipment (PPE).
• Team Collaboration: Work closely with other technicians and service advisors to ensure efficient workflow and timely completion of repairs.
• Continuous Improvement: Stay updated on the latest automotive technologies and participate in ongoing training and development programs.

Desirable Criteria:

• Experience with a wide range of vehicle brands and models.
• Familiarity with the latest automotive technologies and industry trends.
• Certification in hybrid or electric vehicle maintenance.

Benefits:

• Competitive salary package with performance-based incentives.
• Opportunities for professional development and career progression.
• A supportive and collaborative work environment.
• Access to the latest tools and diagnostic equipment.

Join Curtis Coast Automotive and become a key player in delivering top-tier automotive services to our valued customers.

If you have the skills, experience, and passion for vehicles, we want to hear from you!

Cairns Tiling Services is in need of a full-time experienced and qualified tiler that is willing to learn under a team of professionals to master their skills. This position requires a construction card, valid drivers licence and the ability to travel to and from the various work sites each day with the required tools and items necessary to complete their work. It is essential that the candidate be willing to learn and become proficient in their work that is of the highest quality. The duties of this job role include: 1. Examining plans, measuring and marking surfaces and laying out work. 2. Preparing wall and floor surfaces including cleaning, grinding, levelling and waterproofing. 3. Spreading adhesive. 4. Appropriate use of tile cutting tools. 5. Laying various tiles/ stone on internal and external walls and floors for protective and decorative finishes. and 6. Creating finishing and finalising touches.

The candidate must also work extremely well in a team, whilst also being independent in their designated tasks and have a strong work ethic. This company prides itself on delivering the best customer satisfaction and in return staff can expect performance bonus's and satisfaction to match.

Senior Data Analyst Required - South Western Sydney - 18 month FTC - Greenfield Azure / Databricks Your new company Hays are partnering with a company based in South Western Sydney who are seeking a Senior Data Analyst to join their growing team. Your new role The data analyst will lead all reporting, visualisation, data modelling and stakeholder engagement for insights on the greenfield transformation. What you'll need to succeed - Min 4 years' experience in Data Analysis with SQL Server - Experience on Azure Databricks transformations, Azure Data Factory also highly regarded - Expertise in SQL Server and End-to-end Power BI Development - Data modelling and visualisation skills - Knowledge of data governance tools within Azure preferred with tools such as Purview or Synapse What you'll get in return - Annual salary ranges from $100,000 - $110,000 + super - 35 hour working week - 9-day fortnight in the form of an RDO if overtime requirements of min 30 mins per day are met - Valuable experience in a greenfield Azure implementation as a data analyst, laying the foundations for Advanced Analytics & AI What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. Please click here to apply.

Permanent position for Commercial Electricians available! Are you currently looking for a permanent opportunity in a company invested in growth and development in their employees and stature? Look no further! Your new company
Hays is currently partnered with a highly established Electrical Company in search of Commercial Electricians interested in a Permanent Position for local work in Projects across the Metro Area.
The company mentioned has been operating within the Perth market for over 20 years and is planning on expanding its workforce across several sectors, including construction, maintenance and audiovisual. Their team has ongoing projects across the Perth Metro Area and are chasing fully experienced commercial electricians for a suitable & relevant team. Current ongoing projects include BHP, St John of God, Coles, etc. Your new role

Based on your experience in the commercial sector, you will be placed in the relevant team. (Construction, Maintenance, Audiovisual)
Hours - 6am-2:30pm with 1 RDO.
When assigned a project, you will be there for the whole project, making you familiar with the team, site and also for your convenience.
A vehicle is provided with a fuel card, or an allowance.
You will be given the opportunity to grow, and are given the ability to diverge to a different sector or role (white collar, etc) if you so choose.

What you'll need to succeed

A Grade Electrician / Australian Unrestricted Electrical Licence
Commercial Electrician Experience
White Card
Australian Driving Licence
LVR/CPR
Open Cable Licence (Desirable)
Work in a team environment
Strong Focus on Health and Safety
Excellent communication skills and high attention to detail.
Highly motivated.

What you'll get in return

$38 - $55 - based on experience
Weekly Pay
Potential for Overtime with Penalities
Strong team culture,
Convenient Work locations - 1 Site for the majority of projects.
Vehicle + Fuel Card or Allowance
$250 to be on call.
Strong Culture (Culture Clubs, Bi-yearly Events)
A 1% per year loyalty scheme is split quarterly.
Courses provided if necessary.

What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Please click here to apply.

Great Australian company to work for Apply now to start
Location:
Western Sydney. North Sydney
Salary: $80,000 - $90,000 per year
Job Type: Full-Time
Start Date: Immediate or New Year

Job Description:
Our client, who is Australian owned and operated, is seeking a skilled CNC Machine Operator with experience of operating machines to join our client. This is a full-time position offering a competitive salary between $80,000 and $90,000 per year.
Key Responsibilities:

Operate and maintain CNC machines, ensuring precision and quality in all tasks.
Utilise Amada machine experience to optimise production processes.
Performing routine maintenance and troubleshooting of equipment.
Collaborate with team members to meet production goals and deadlines.

Qualifications:

Proven experience as a CNC Machine Operator.
Specific experience with Amada machines is highly desired.
Strong attention to detail and commitment to quality.
The ability to work independently and as part of a team.
Excellent problem-solving skills.

Benefits:

Competitive salary.
Opportunity to start immediately or in the new year.
Comprehensive benefits package (health, dental, retirement plans, etc.).


What you need to do now To discuss our vacancies in detail please call Nabil on 0490127043 or, click 'apply now' to forward an up-to-date copy of your CV. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Please click here to apply.

An incredible opportunity to kick-start a career in the maritime industry! Marine Equipment Service Technician Your new company
Our client, a well-established design, manufacturer, and supplier of high quality lifesaving solutions across the marine, energy, aerospace, and defence industries is seeking a motivated and enthusiastic individual to start a Marine Service Technician Traineeship. They pride themselves on their exceptional quality, reliable and environmentally sustainable product portfolio. Start your brand-new career with a reputable company that is fast-paced, challenging and incredibly rewarding.
Your new role
In your new role you will assist in the service, repair and maintenance of a combination of industry leading innovative survival technology and safety solutions out of the Cairns service centre. This will be a permanent full-time role with extensive on the job training. You will have support gaining specialist accreditations and certificates.

Your other duties will include but are not limited to:

Adhering to internal WH&S and quality procedures.
Assisting with pick-up and delivery of products to customers and providing support with service enquiries, quotes, orders, technical information, warranty issues and stock availability.
Stocktakes.
Participating in all internal and external training.
Working with all areas of sales as well as hands on tasks including servicing and testing all lifesaving products and equipment.

What you'll need to succeed
Your enthusiastic attitude and work ethic will lead to your success in this role. You are willing to complete comprehensive training to excel in your new role as a Marine Service Technician and ultimately have a long and rewarding career. You are hands-on, have excellent communication skills, are a team player and have a strong focus on WH&S. You take pride in your work, strive to meet deadlines and have strong time-management and organisational skills.

Additional desirable skills:

Experience in the service industry
Ability to comprehend service manuals and instructions
Basic computer skills, including Microsoft Office


This is your opportunity to get your foot in the door with the marine service industry, build a career and make your mark on a new role. Our client is seeking candidates with a positive attitude, a strong work ethic, and the desire to succeed. Regardless of your skills and experience, we are open to seeing all applicants. Opportunity awaits!
What you'll get in return
In return for your commitment, skills and work ethic, you will receive:

Permanent Employment
Great Salary Package
Opportunity to start an incredible new career
Extensive on the job training
Traineeship and experience with a reputable company
Amazing company culture and positive working environment

What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. Please click here to apply.

Halgan Pty Ltd Position Overview The Field Commissioning and Compliance Specialist is responsible for the on-site field commissioning of liquid waste treatment products such as pumping stations, grease traps, and pre-treatment systems. The role ensures that all installations comply with relevant plumbing and drainage standards, specifically AS3500.1:2003. This position also involves overseeing the maintenance and asset management of liquid waste treatment facilities, conducting research and development (R&D) for regulatory compliance, and assisting with product certification processes in line with AS1546.1 and other applicable standards. Benefits Career Development Opportunities Opportunities to advance into senior technical or compliance management roles, depending on performance and company needs. Task & Responsibilities On-Site Field Commissioning Commission and oversee the installation of products such as pumping stations, grease traps, and pre-treatment systems. Ensure that all installations comply with AS3500.1:2003 plumbing and drainage standards. Liaise with contractors, plumbers, and engineers to ensure correct installation of valving, connections, and fittings. Perform on-site troubleshooting and provide technical guidance during commissioning phases. Plumbing & Drainage Compliance Ensure all systems, including piping, fittings, and connections, adhere to AS3500.1:2003 standards during the production and installation processes. Verify and inspect plumbing layouts and schematics for compliance before and after installation. Assist in resolving any compliance-related issues that arise during commissioning or product development stages. Liquid Waste Asset Management Manage the maintenance schedules and asset management of liquid waste treatment facilities, including pump servicing, aeration system servicing, and transfer system servicing. Conduct routine inspections and maintenance to ensure the longevity and efficiency of liquid waste treatment systems. Track and document service records and operational performance of key assets. Develop maintenance plans and schedules to prevent system downtime and improve operational efficiency. Research & Development (R&D) for Compliance Participate in R&D initiatives aimed at developing and improving products to ensure compliance with AS3500.1:2003 and other regulatory standards. Work closely with the engineering team to ensure new product designs are compliant with relevant codes and regulations. Test and evaluate new technologies and materials to enhance product performance and compliance. Quality Assurance & Certification Assist with obtaining AS1546.1 certification for products, ensuring all quality and safety standards are met. Collaborate with the Quality Assurance (QA) team to integrate relevant codes and standards into the product testing and approval processes. Prepare and maintain documentation required for certification and compliance reporting. Parts & Product QA Manage the QA process for both individual parts and complete products, ensuring that they meet performance, safety, and compliance standards. Conduct thorough inspections and testing of parts to identify defects or non-conformance with specifications. Develop and implement QA protocols to maintain high standards in both production and field installations. Collaborate with suppliers and vendors to ensure that all incoming parts meet company and industry standards before use in production. Qualification & Experience Key Skills & Competencies Technical Competencies Strong understanding of AS3500.1:2003 and AS1546.1 compliance standards. Expertise in plumbing, drainage systems, and liquid waste treatment systems. Proficiency in commissioning and troubleshooting liquid waste treatment products, including pumping stations, grease traps, and aeration systems. Knowledge of asset management and maintenance protocols for liquid waste facilities. Problem-Solving & Analytical Skills Ability to analyse complex technical issues and develop effective solutions. Strong diagnostic skills for identifying and resolving installation and maintenance problems. Communication & Teamwork Excellent verbal and written communication skills for liaising with contractors, plumbers, engineers, and regulatory bodies. Strong team player with the ability to collaborate across departments, including R&D, production, and QA teams. Education & Experience Degree in Plumbing, Engineering, Environmental Science, or a related field (preferred). 3+ years of experience in liquid waste treatment systems, plumbing, or compliance roles. Proven experience with product certification and regulatory compliance processes. KPIs (Key Performance Indicators) Compliance Rate : Percentage of installations compliant with AS3500.1:2003. Maintenance Efficiency : Number of service calls resolved within the scheduled maintenance timeframe. Product Certification : Number of products successfully certified to AS1546.1 and other relevant standards. Commissioning Success : On-time completion of field commissioning tasks without major issues or delays. Working Conditions Field-based and factory work, with regular travel to installation sites and treatment facilities. Occasional office-based tasks related to reporting and documentation.   About Company Halgan Pty Ltd, an Australian owned company, established in 1994, specialises in all aspects of sustainable environmental treatment solutions. From the initial manufacturing of treatment products, with a state of the art rotomoulding machine, right through to the consultation and sales process, plus after sales service and greasetrap pumpouts. Halgan Pty Ltd provides a superior product with stringent quality assurance. Salary: $28-29 Job Publish: 26-11-2024 Job Expire: 26-12-2024 Please click to View more detail / apply .

*This position qualifies for incentives under the NSW Rural Health Workforce Incentive Scheme, including up to $10,000 sign on incentive, and up to $5,000 each year (incentive value dependent on full-time equivalent, position and location). Find out more here

Employment Type: Full Time, Part Time and Casual opportunities available
Position Classification: Registered Nurse
Remuneration: $72,152.53 - $101,299.48 per annum, pro rata (+ super + 17.5% leave loading where applicable)
Hours per Week: up to 38
Requisition ID: REQ536831
Applications Close: 5 January 2025
Vaccination Category: A





Outstanding Experiences. Infinite Opportunities.





Here in the Riverina, we treasure your nursing skills and experience and we’re ready to roll out the red carpet to welcome you to town.

We’ve prepared oodles of goodies to help you move and settle in, including:

Up to $10,000 sign on incentive, and up to $5,000 each year (incentive value dependent on full- time equivalent, position and location). Find out more here
Salary packaging up to $20,600 per annum tax free for living expenses! Take advantage of novated leasing a new car!
482 temporary visa sponsorship considerations
Relocation assistance and accommodation support considerations
Subsidised gym and leisure centre membership for you and your family
Free confidential counselling services for you and your family


Craving a fresh start somewhere new and actually interesting? Join the incredible team in the Murrumbidgee District. Jump in at a comfort level that suits you: from state-of-the-art hospitals that will remind you of the city, to a small multi-disciplinary health facility where you literally get to do it all. No matter where you choose, your learning will be nurtured and you’ll be well supported to operate at the top of your scope.

And don’t worry - there are already oodles of young people here to welcome you: at work, in local clubs, at the pub, and down at the river!

There’s also heaps to show your family when they come to visit, which is a breeze - you’ll be central to Sydney, Melbourne and Canberra. (You can always pop home for the weekend on a quick flight if you find a break in your social calendar!)

To help you make the move to our little slice of heaven, we’ll help cover your relocation and travel expenses, help you find housing and get settled, and help in other handy ways - just let us know how we can help.

Want to know more about the community of Leeton? Visit us here



About Your Role

Joining the acute ward as a Registered Nurse is your entry into the nursing world, the exposure of work diversity you experience is forever changing, therefore the opportunity to expand your expertise in an acute setting, or a new speciality unit, is what makes this role so exciting.

Your integral part of our multidisciplinary team will see you demonstrate great clinical judgement with a patient centred approach. This holds you in good stead for a great start to your career with us at MLHD! This role will also see you leading and supervising Enrolled Nurses and Assistants in Nursing to support quality care and positive health outcomes for our patients.

Learn more about the role and requirements here.





Upgrade Your Career and Lifestyle at MLHD

Go on, you’ve earned a promotion, a world-class workplace, inspiring colleagues, award-winning sta? and patient programs - all wrapped up in a rich tapestry of cultural treasures. Contact, Caroline Dent, Acting Nurse Unit Manager on 02 6953 1111 or [email protected]

now for a confidential chat.

Your application will require you to include a resume and cover letter outlining your skills and experience and why you are a good fit for this position.




MLHD is an Equal Opportunity Employer and encourage all suitably qualified applicants to apply, including Aboriginal People and people from racial, ethnic, or ethno-religious minority groups and people with disability.

#RuralHealthIncentives

Country:  Australia







Location:  Newcastle, NSW, Australia







Location details:  Sandgate







Employment type:  Undefined term







Full-time/part-time position:  Full time







Workplace Type:  Hybrid

















Konecranes and Demag is committed to lifting businesses. For the last 100 years we have been serving a broad range of customers around the world. With 16,000 employees in almost 50 countries, we have an enormous global network. This means, that as an employee





... Click here to view more detail / apply for Service Manager