On behalf of our client, we are advertising,
Schlam is looking for Boilermaker and welder , and have vacancies around Western Australia, in metro and regionally.
PURPOSE
The purpose of this position is to apply the skills, competency and experience of a qualified Mobile Plant Boilermaker and welder to a range of tasks as allocated by the supervisors including welding fabrication services, shutdown services, MARC contractor shift services and general maintenance of mobile equipment.
DUTIES & RESPONSIBILITIES
Work Productivity
• Adhere to set break intervals
• Ability to meet schedules & delivery times;
• Plan work to ensure all equipment, Tooling & consumables are accounted for prior to commencing tasks;
• Complete time sheets ensuring job number and task identification is accurate for time reporting;
Quality
• Understand Inspection Test Plans (ITP);
• Understand Work Orders, Project Gantts & General Scope of works;
• Advise supervisor when work has reached hold points for inspection;
• All completed welds must comply with relevant qualified weld procedures provided. To include machine set up, weld profile, inter pass temperatures and preheat requirements;
• Record welder identification number on all areas welded;
• Ensure pre, intermediate & post work photos are taken when requested by Supervisor;
• Ensure all Fabrication work that is completed is within allowable tolerances. Equipment
• Ensure minimum Schlam personal tooling requirements are adhered to;
• Pre-Start checks are mandatory on all operating equipment prior to commencing;
• Report any equipment problems immediately to a Supervisor & follow correct tagging procedure;
• Report any equipment shortfalls & additional requirements to Schlam Manager;
• Ensure all equipment requiring fuel has been replenished after job completion prior to leaving site.
Safety
• Attend prestart meetings prior to start of shift;
• Adhering to the Safety Management System, by ensuring company compliance throughout all work activities;
• Work area is always kept clean & tidy;
• Fill out relevant site paperwork I.E JHA, CCC, Take 5 etc. To client’s requirements;
• Complete min 1 safe checks per day;
• Follow Safe work procedures (SWP);
• Perform workshop inspections as allocated;
• Report hazards, near misses and incidents immediately to your supervisor/manager.
QUALIFICATIONS - LICENSES, CERTIFICATES $ COMPETENCIES
Essential Qualifications, Licences and VOC
• Trade Certification – Certificate III in Engineering Heavy Fabrication
• AS1554.5 – AS1554.4 welding test in 3G & 4G positions – MMAW & FCAW
• Minimum “MR’ class drivers’ licence;
• Forklift Licence
• EWP Licence
• Intermediate Riggers Licence
• Doging Licence
• Working at Heights Licence
• Confined spaces Licence
Competencies
• Pre-employment weld testing;
• Pre-employment Air Arc Gouge testing
KNOWLEDGE, EXPERIENCE & SKILLS
• Technical knowledge of Mobile Plant repair process
• Understanding of Mobile equipment isolation points
• Experience & knowledge in the use of generator welders & associated wire feeders
• Experience & knowledge of setup & operation of Thermal Arc Lancing process
• Experience & knowledge of setup & use of inner shield & outer shield welding process
• Experience within the Engineering and Resource sector.
CRITICAL BEHAVIOURS
• Ability to work unsupervised;
• Teamwork;
• Communication;
• Time Management;
• Problem solving;
• Take pride in your work;
• Strong understanding of Company policies and procedures;
• Can do, will do, done safely ethos.
Salary : $39- $60 p/hr
Job Type : Full time
Location: Welshpool WA
Schlam is looking for Boilermaker and welder , and have vacancies around Western Australia, in metro and regionally.
PURPOSE
The purpose of this position is to apply the skills, competency and experience of a qualified Mobile Plant Boilermaker and welder to a range of tasks as allocated by the supervisors including welding fabrication services, shutdown services, MARC contractor shift services and general maintenance of mobile equipment.
DUTIES & RESPONSIBILITIES
Work Productivity
• Adhere to set break intervals
• Ability to meet schedules & delivery times;
• Plan work to ensure all equipment, Tooling & consumables are accounted for prior to commencing tasks;
• Complete time sheets ensuring job number and task identification is accurate for time reporting;
Quality
• Understand Inspection Test Plans (ITP);
• Understand Work Orders, Project Gantts & General Scope of works;
• Advise supervisor when work has reached hold points for inspection;
• All completed welds must comply with relevant qualified weld procedures provided. To include machine set up, weld profile, inter pass temperatures and preheat requirements;
• Record welder identification number on all areas welded;
• Ensure pre, intermediate & post work photos are taken when requested by Supervisor;
• Ensure all Fabrication work that is completed is within allowable tolerances. Equipment
• Ensure minimum Schlam personal tooling requirements are adhered to;
• Pre-Start checks are mandatory on all operating equipment prior to commencing;
• Report any equipment problems immediately to a Supervisor & follow correct tagging procedure;
• Report any equipment shortfalls & additional requirements to Schlam Manager;
• Ensure all equipment requiring fuel has been replenished after job completion prior to leaving site.
Safety
• Attend prestart meetings prior to start of shift;
• Adhering to the Safety Management System, by ensuring company compliance throughout all work activities;
• Work area is always kept clean & tidy;
• Fill out relevant site paperwork I.E JHA, CCC, Take 5 etc. To client’s requirements;
• Complete min 1 safe checks per day;
• Follow Safe work procedures (SWP);
• Perform workshop inspections as allocated;
• Report hazards, near misses and incidents immediately to your supervisor/manager.
QUALIFICATIONS - LICENSES, CERTIFICATES $ COMPETENCIES
Essential Qualifications, Licences and VOC
• Trade Certification – Certificate III in Engineering Heavy Fabrication
• AS1554.5 – AS1554.4 welding test in 3G & 4G positions – MMAW & FCAW
• Minimum “MR’ class drivers’ licence;
• Forklift Licence
• EWP Licence
• Intermediate Riggers Licence
• Doging Licence
• Working at Heights Licence
• Confined spaces Licence
Competencies
• Pre-employment weld testing;
• Pre-employment Air Arc Gouge testing
KNOWLEDGE, EXPERIENCE & SKILLS
• Technical knowledge of Mobile Plant repair process
• Understanding of Mobile equipment isolation points
• Experience & knowledge in the use of generator welders & associated wire feeders
• Experience & knowledge of setup & operation of Thermal Arc Lancing process
• Experience & knowledge of setup & use of inner shield & outer shield welding process
• Experience within the Engineering and Resource sector.
CRITICAL BEHAVIOURS
• Ability to work unsupervised;
• Teamwork;
• Communication;
• Time Management;
• Problem solving;
• Take pride in your work;
• Strong understanding of Company policies and procedures;
• Can do, will do, done safely ethos.
Salary : $39- $60 p/hr
Job Type : Full time
Location: Welshpool WA
